[ell-i-developers] Re: How to make serial working?

  • From: jigsaw <jigsaw@xxxxxxxxx>
  • To: "ell-i-developers@xxxxxxxxxxxxx" <ell-i-developers@xxxxxxxxxxxxx>
  • Date: Sun, 1 Jun 2014 18:59:22 +0300

@Pekka OK this is what Ivan and I were trying to figure our during
hackthon. We noticed that only Arduino IDE was able to talk over serial.

@Jose Thanks for the sample code. I was using same code but wrong GPIO pin.
So how do you get the serial working? By hacking Arduino IDE in the same
way as Pekka said, or you made another customized terminal?


On Sun, Jun 1, 2014 at 6:01 PM, Pekka Nikander <pekka.nikander@xxxxxx>
wrote:

> The current Ell-i board (Ellduino) Serial requires that you don't pull DTR
> or RTS up(?), IIRC.  They are used for reseting the board.  If you use a
> standard terminal program, that will pull the handshake signals so that the
> board goes to the reset state.
>
> This is one of the things that will be fixed in the next boards.
>
> The issue should be documented here:
>
> https://github.com/Ell-i/Hackathon/wiki/Ellduino-serial-programming-interface
> but as of today, it is not.
>
> Here is how we fix this for the Arduino IDE:
>
>
> https://github.com/Ell-i/Arduino/commit/8748a243f22216370c478d937abc60f03697de4e
>
> --Pekka
>
>
> On 2014–06–01, at 17:00 , Qinglai Xiao <jigsaw@xxxxxxxxx> wrote:
>
> > Hi Teemu,
> >
> > Thanks. Im working with the ell-i board, so the stm32f4 story doesn't
> > really help.
> > Im working at home, so I don't have logic analyser. I can manage to
> > make serial working in a hard way by debugging it with mbed. However it
> > could save a lot of time if someone shares the experience of ell-i +
> > serial. 发件人: Teemu Hakala
> > 发送时间: ‎2014/‎6/‎1 16:47
> > 收件人: ell-i-developers@xxxxxxxxxxxxx
> > 主题: [ell-i-developers] Re: How to make serial working?
> > Hi
> >
> > I relayed this question to #ELL-i IRC channel on the Freenode network
> > and was given a good link to things the software synth winner used as
> > a starting point with the F4 Discovery:
> >
> > http://vedder.se/2012/07/play-mp3-on-the-stm32f4-discovery/
> >
> > Then there’s the usual "is everything properly connected" mantra. Are
> > you working on it at home or with Ivan, ie. do you have access to a
> > logic analyzer?
> >
> > - t
> >
> > On 1.6.2014, at 16:25, jigsaw <jigsaw@xxxxxxxxx> wrote:
> >
> >> Hi,
> >>
> >> I first tried to load elli/Runtime/stm32/tests/test_Serial_write_uint8
> to ell-i, but nothing is received in minicom or screen. Then I tried to
> manually initialize RCC and USART ( I tried both USART1 and USART2), but
> still failed.
> >>
> >>
> >> I'm now trying to port the debugger to ell-i, but without working
> serial I can't make it.
> >>
> >> Could anyone give a hand? Has anyone got serial working on ell-i with
> minicom or any other common terminal?
> >>
> >> thx &
> >> rgds,
> >> -Qinglai
> >
>
>

Other related posts: