[elky] Re: Third brake light
That's why I went with the ZR1 style rear roll pan..... 4 BIG lights to tell you to back off.
I like that bumper cause of the big lights and the fact that lenses are readily available and they are just brighter than the elky ones. Not a cheap bumper though and my problem is it isn't a bumper at all. I need a hunk of steel back there just in case and for the occasional bump into a trailer tongue.
Then I added the LED brake light too, and that did more than the roll pan did for getting attention. If you remember, last fall, or was it spring? I put LED lights at the bottom too. Instant ON.
I remember you doing it but I don't remember what it looked like..
I like what you did Robert. I have a pin hole between the window chrome, and the top chrome, and the LED double sided tape seals it up.
Here is mine: <http://myelcamino.net/ec/brake_light.jpg>http://myelcamino.net/ec/brake_light.jpg 
I recommend this for every El Camino.
JC
I like yours but I wasn't going to put a hole in there for it.
This is what I have in mine. http://www.superbrightleds.com/specs/WFLB.htm I got mine at HF for $5 on sale as usual. If I did it again I'd cut a piece of the lip of the headliner trim out so the light sits down lower in the trim and the trim will go back higher and the angle of the LEDs would be better but it's fine as is.
Robert Adams 


Rules: Please play nicely with others.

-List members page (text & pic links):
http://www.myelcamino.net/eclist.htm
-List members page (all pics):
http://www.myelcamino.net/ec_list.htm

Other related posts: