[elky] Re: Busy Sunday
- From: elcam84@xxxxxxxxx
- To: elky@xxxxxxxxxxxxx
- Date: Sun, 9 Oct 2011 21:23:15 -0400
I woke up this morning and took the El Camino to the school. It was 80 and
sunny, just beautiful today.
We are in cleveland and the weather has been great here. Walked a
little over 5 miles today. Headed home tomorrow night.
Tom was working on painting the Gator School
Colors of Black and Orange, instead of John Deer Green and yellow. They use
it at the field during games I think. So he was there with one of the kids
from the Auto Club.
Cool. Will look better too.
I put it up on the lift right after I got there, and it was just as I
suspected, the rubber hose to tank tube connection was leaking at the return
line. This is actually the old fuel sending line, and is bigger in diameter.
Robert made a new supply line when he modified my sending unit for the pump.
I did that so many years ago i don't remember what i did to it.
I had a Fuel injection style clamp on it that was a bit too big. So the hose
was crimping with a little V in it that made it leak. Putting a standard
style smaller clamp on it cleared up the problem right away. Thanks to Tom
for that clamp and the opportunity to use the lift.
That clamp will work fine on the return line.
Elkenstein is running and driving as good as it ever has. Any of you that
want to drive it are welcome.
Hmm maybe i cnc make a detour on the way home.
It's a treat for me, I can tell you. It even
sounds different with adequate fuel pressure coming from the new pump. When
I am cruising, I can mash it, and it has torque galore. I still have yet to
put it to the floor,
Cool. My pump is probably not working 100% either.
Not that I am afraid of what will happen when it breaks
loose, but that I want to keep a decent rate on my insurance, and I honestly
have more motor than I can use driving around the streets here. I need to
find an autocross or something. To say it feels tight is an understatement.
Very confident feel. Firm, but predictable, and if I push it, something else
will be the weak link now, and not the structure. No rattles at all now.
It's hard to say what will be next on the list, but I have a list. Not in
this order, but some will have to happen at the same time.
- Now that the fuel pump is in, I am going to get the performance chip
burned. Just need to confirm all the data again first. I'll be gathering
some more.
- OVERDRIVE ... I have a line on a 2004r built up for 500HP tolerance.
The guy spent $450 on it, and wants to get that out of it. I am saving to
give it to him.
That's cheap for a 2004r.
- I will need a double hump cross member to change the exhaust, and will
have to modify the frame a bit..... but it just so happens that I have a
welder now.
- I will at least need to change one side of the headers, but will
probably do both. Anyone have preferences here?
- I have been looking at side pipes, and I just love them. If I don't do
that, I may come out before the wheels kind of like Ray's approach only both
sides. But I like side pipes, and it makes it look even lower. See this
link<http://www.jegs.com/i/Patriot-Exhaust/737/H1050/10002/-1?parentProductId=>
- Wheels.... Going to go with Gray center Torque Thrust II or M in 17" to
allow for big brakes.
I kind of like the side exhaust Lauren engineering has.
- Did I mention Big Brakes? Robert had a set up he was talking about,
using larger S-10 Rotors, and spindles, and tubular upper A arms.
Stock arms with the astro stuff. C5 brakes fit with a bracket.
- To get the power to the ground I would need at least tubular rear
control arms, and probably a Posi too. The 3.23 gears will be fine. 26
spline, 3.08 or numerically higher posi carrier is what I am looking for.
I figure about 2 years to get this done. 3 if I am not lucky on parts
acquisition.
Then, I got the window replaced in the kitchen. My neighbor Jose came over
to help me with peeling back the siding and wrestling it in to place. It was
a great help, adn I really appreciated it. I just have to finish the wood
framing inside now. I'll probably use Oak to match the cabinets.
Pics of the window install ?
Now it's time for a cup of coffee, and some CAD work while Cindy is at her
book club. Is anyone else tired just reading this? Great day.
JC
Sounds like the elky is doing great and making you happy.
Swapped batteries in mine and it holds a charge now. Battery was bad from day
1.
Robert Adams
Rules: Please play nicely with others.
-List members page (text & pic links):
http://www.myelcamino.net/eclist.htm
-List members page (all pics):
http://www.myelcamino.net/ec_list.htm
Other related posts:
