[duxuser] Re: embossing problem
When that happens you might be having sollenoid trouble and this will have to be fixed by Enabling Technologies. How long have you had this embosser? ----- Original Message ----- From: "Gary Metzler" <gmtravel@xxxxxxxxxxxxx> 
To: <duxuser@xxxxxxxxxxxxx>
Sent: Sunday, May 30, 2010 1:51 PM
Subject: [duxuser] embossing problem



Hi All,

I am running dbt 10.5 with a Juliet pro 60 embosser.  Lately I have been
noticing that the documents have been starting embossing about a quarter of 
the way down the page.  It is the same on both sides.  I use 8.5 x 11 inch
paper.  Is there some settings I need to check and change?  Any help would
be most appreciated.  Thanks,

Regards, Gary Metzler
http://outtasighttravel.com <http://outtasighttravel.com/>
sendto:gmtravel@xxxxxxxxxxxxx
messenger:gmetzler1150@xxxxxxxxxxx
skype: garymetz





* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
*   unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting http://www.freelists.org.  The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *

Other related posts: