[duxuser] Re: embossing problem

  • From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx>
  • To: <duxuser@xxxxxxxxxxxxx>
  • Date: Sun, 30 May 2010 21:54:26 +0100

Hi Gary,

Does this happen even after setting top of form via the control panel?

George.

> _____________________________________________ 
> From:         duxuser-bounce@xxxxxxxxxxxxx
> [mailto:duxuser-bounce@xxxxxxxxxxxxx]  On Behalf Of Gary Metzler
> Sent: 30 May 2010 18:52
> To:   duxuser@xxxxxxxxxxxxx
> Subject:      [duxuser] embossing problem
> 
> Hi All,
> 
> I am running dbt 10.5 with a Juliet pro 60 embosser.  Lately I have
> been noticing that the documents have been starting embossing about
> a quarter of the way down the page.  It is the same on both sides.
> I use 8.5 x 11 inch paper.  Is there some settings I need to check
> and change?  Any help would be most appreciated.  Thanks,
> 
> Regards, Gary Metzler
> http://outtasighttravel.com <http://outtasighttravel.com/> 
> sendto:gmtravel@xxxxxxxxxxxxx
> messenger:gmetzler1150@xxxxxxxxxxx
> skype: garymetz
>  
> 

Other related posts: