[duxuser] Re: embossing problem
- From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx>
- To: <duxuser@xxxxxxxxxxxxx>
- Date: Mon, 31 May 2010 06:52:39 +0100
Hi Gary,
I'm getting a bit too old for all that running around on horseback
rescuing damsels in distress! (Smile)
Glad you got sorted though.
George,
________________________________
From: duxuser-bounce@xxxxxxxxxxxxx
[mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of Gary Metzler
Sent: 31 May 2010 00:31
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] Re: embossing problem
Hi George,
I tried hitting 2e before embossing anything and guess what. It is
embossing at the top of the page as it should. I tried embossing the
file I was having a problem with and all is well.
By the way did her Majesty ever give you that Knighthood that you so
richly deserve? Thanks for all the good you do for us.
________________________________
From: duxuser-bounce@xxxxxxxxxxxxx
[mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of George Bell
Sent: Sunday, May 30, 2010 5:02 PM
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] Re: embossing problem
Sorry, Gary. I should have made it clear I'm referring to the
Juliet's panel.
George.
________________________________
From: duxuser-bounce@xxxxxxxxxxxxx
[mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of George Bell
Sent: 30 May 2010 21:54
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] Re: embossing problem
Hi Gary,
Does this happen even after setting top of form via the control panel?
George.
_____________________________________________
From: duxuser-bounce@xxxxxxxxxxxxx
[mailto:duxuser-bounce@xxxxxxxxxxxxx
<mailto:duxuser-bounce@xxxxxxxxxxxxx> ] On Behalf Of Gary Metzler
Sent: 30 May 2010 18:52
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] embossing problem
Hi All,
I am running dbt 10.5 with a Juliet pro 60 embosser. Lately I have
been noticing that the documents have been starting embossing about a
quarter of the way down the page. It is the same on both sides. I
use 8.5 x 11 inch paper. Is there some settings I need to check and
change? Any help would be most appreciated. Thanks,
Regards, Gary Metzler
http://outtasighttravel.com <http://outtasighttravel.com/>
sendto:gmtravel@xxxxxxxxxxxxx
messenger:gmetzler1150@xxxxxxxxxxx
skype: garymetz
Other related posts:
