Hi Fransis, I've had the embosser since 2002. -----Original Message----- From: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of Francis E. Khan Sent: Sunday, May 30, 2010 5:07 PM To: duxuser@xxxxxxxxxxxxx Subject: [duxuser] Re: embossing problem When that happens you might be having sollenoid trouble and this will have to be fixed by Enabling Technologies. How long have you had this embosser? ----- Original Message ----- From: "Gary Metzler" <gmtravel@xxxxxxxxxxxxx> To: <duxuser@xxxxxxxxxxxxx> Sent: Sunday, May 30, 2010 1:51 PM Subject: [duxuser] embossing problem > Hi All, > > I am running dbt 10.5 with a Juliet pro 60 embosser. Lately I have been > noticing that the documents have been starting embossing about a quarter > of > the way down the page. It is the same on both sides. I use 8.5 x 11 inch > paper. Is there some settings I need to check and change? Any help would > be most appreciated. Thanks, > > Regards, Gary Metzler > http://outtasighttravel.com <http://outtasighttravel.com/> > sendto:gmtravel@xxxxxxxxxxxxx > messenger:gmetzler1150@xxxxxxxxxxx > skype: garymetz > > > * * * * This message is via list duxuser at freelists.org. * To unsubscribe, send a blank message with * unsubscribe * as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also * subscribe, unsubscribe, and set vacation mode and other subscription * options by visiting //www.freelists.org. The list archive * is also located there. * Duxbury Systems' web site is http://www.duxburysystems.com * * * * * * * This message is via list duxuser at freelists.org. * To unsubscribe, send a blank message with * unsubscribe * as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also * subscribe, unsubscribe, and set vacation mode and other subscription * options by visiting //www.freelists.org. The list archive * is also located there. * Duxbury Systems' web site is http://www.duxburysystems.com * * *