[duxuser] Re: dbt and everest embosser
- From: "Armando Maldonado" <amaldonado4@xxxxxxxxxxxxxxxxx>
- To: <duxuser@xxxxxxxxxxxxx>
- Date: Sat, 20 Jan 2007 11:27:26 -0800
so by doing this, will teh brialle run over the bottom margin? That's what I'm
afraid of. Thanks.
Armando
----- Original Message -----
From: George Bell
To: duxuser@xxxxxxxxxxxxx
Sent: Saturday, January 20, 2007 11:22 AM
Subject: [duxuser] Re: dbt and everest embosser
Oops, sorry. The same principal applies though. 26 lines + 1 for Top Margin
means allowing for 27 lines in total on the page.
------------------------------------------------------------------------------
From: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx] On
Behalf Of Armando Maldonado
Sent: 20 January 2007 19:19
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] Re: dbt and everest embosser
the top margin is est at 1.
----- Original Message -----
From: George Bell
To: duxuser@xxxxxxxxxxxxx
Sent: Saturday, January 20, 2007 11:16 AM
Subject: [duxuser] Re: dbt and everest embosser
Hi Armando,
If you have a binding margin of 3 cells, and 30 cells per line, you will
have to allow for 33 cells in total per line.
Try reducing your characters per line to 28 or 29.
Likewise, if you have a top margin a 3 lines and wish to print 26 lines,
you will need to allow for a total of 29 lines.
George.
----------------------------------------------------------------------------
From: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx] On
Behalf Of Armando Maldonado
Sent: 20 January 2007 19:08
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] dbt and everest embosser
Hello Members,
I'm using dbt 10.6 with an everst embosser version II. For some reason, I
cannot get dbt to work properly with the embosser. What happens is that the
page number appears on the second line rather than on the right side of page,
and the braille goes over the margin. I have set the embosser to characters per
line at 32, left margin, b margin, top margin and bottom margin all to zero.
The lines per page is set at 26. In DBT, I have it set to the following:
characters per line, 30, binding margin 3, top margin 1, right most placement
cell at 32. If you can please tell me what I need to change in order for the
two to communicate properly, this would be appreciated. Thanks.
Armando
----------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.432 / Virus Database: 268.16.10/625 - Release Date: 1/13/2007
5:40 PM
------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.432 / Virus Database: 268.16.10/625 - Release Date: 1/13/2007
5:40 PM
Other related posts:
