[duxuser] Re: "Dotty" Moon
- From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx>
- To: <duxuser@xxxxxxxxxxxxx>
- Date: Thu, 16 Jun 2005 09:36:42 +0100
For the benefit of anyone who is asked by technical support
what version of Index they have.
Version III embossers talk when switched on, and have FOUR
ports on the back. Serial, Parallel, USB and Network
(RJ45).
Version II embossers also talk, but only have TWO ports,
Serial and Parallel.
Version I embossers do NOT talk, and also only have two
ports.
George.
________________________________
From: duxuser-bounce@xxxxxxxxxxxxx
[mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of
irene.grayson@xxxxxxxxx
Sent: 16 June 2005 09:28
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] Re: "Dotty" Moon
Morning George,
Really keen to get involved with this - we have a
Basic D here which is rarely (if ever) used. Though I'm not
sure what version. I'll find out and get back to you, so
would you keep us in mind please??
I. x
Irene Grayson
Project & Operations Supervisor
National Library for the Blind
Far Cromwell Road
Bredbury
Stockport
SK6 2SG
England
E-mail: irene.grayson@xxxxxxxxx
Tel: +44 (0) 161 355 2024
Fax: +44 (0) 161 355 2098
-----Original Message-----
From: George Bell
[mailto:george@xxxxxxxxxxxxxxxxxxx]
Sent: 15 June 2005 14:41
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] "Dotty" Moon
I'm looking for one or two Moon specialists who
would be prepared to help me begin to test a facility we
have created for producing "Dotty" Moon on some Index
embossers using DBT. If you are interested, please read on.
There are some special requirements for the initial testing.
First, you will need to have a Version 3 Index
Embosser. Ideally a Basic S or D, or an Everest, preferably
with version 10.25 or above firmware.
Second, there is a need to upload a specially
created Moon Font to the embosser. This will overwrite the
existing letter graphic character set already in the
embosser, so if you need letter graphics, this may not be
for you.
Third. At this stage I would like to have one or
two sighted testers, since there may be a need to take
precise measurements, and also reposition some of the dot
positions.
If you meet the above requirements and are
interested, please contact me OFF LIST at george@xxxxxxxxxx
George Bell.
____________________________________________________________
____________
This e-mail has been scanned for all viruses by Star
Internet. The
service is powered by MessageLabs.
NOTICE: The information contained in this email and
any attachments is
confidential and may be legally privileged. If you
are not the
intended recipient you are hereby notified that you
must not use,
disclose, distribute, copy, print or rely on this
emails content. If
you are not the intended recipient, please notify
the sender
immediately and then delete the email and any
attachments from your
system.
NLB has made strenuous efforts to ensure that emails
and any
attachments generated by its staff are free from
viruses. However, it
cannot accept any responsibility for any viruses
which are
transmitted. We therefore recommend you scan all
attachments.
Please note that the statements and views expressed
in this email
and any attachments are those of the author and do
not necessarily
represent those of NLB.
NLB Registered Charity Number: 213212
Website: http://www.nlb-online.org
____________________________________________________________
____________
Other related posts:
