Roy,
The settings you describe should work correctly. You should also check the
binding margin setting in DBT's Global Embosser Settings, which should be
set to 0. A higher value for the binding margin will cause the braille to
be pushed toward the right side of the paper, which could explain why it's
going off the page on the right side.
Steve
On Sunday 11/2/03 19:04 Rlr1999@xxxxxxx wrote:
Hi Everyone
I have a Juliet Classic embosser, DBT V 10.4 translator and Word.
My wife is blind and I am trying to set this up so I can emboss letters, recipes etc. for her.
I cannot get past setting up the margins for regular printer paper. (8 1/2 wide).
I followed the instructions which came with the Juliet, but I am still getting embossing off the right side. I believe what I put into the emboser was 15.1 and 14.30. I checked the settings in DBT and they are Max 30, desired 28. (I have tried various combinations of these, none work.)
I want to use the printer paper for one time reading for her. I also have standard braille paper for items she will use repeatedly.
I would appreciate any help in what I am doing wrong. Thank you very much. Roy
* * * * This message is via list duxuser at freelists.org. * To unsubscribe, send a blank message with * unsubscribe * as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also * subscribe, unsubscribe, and set vacation mode and other subscription * options by visiting //www.freelists.org. The list archive * is also located there. * Duxbury Systems' web site is http://www.duxburysystems.com * * *
