[duxhelp] Re: Unable to emboss

  • From: "Mark Mercer" <markm@xxxxxxxxxxxx>
  • To: <duxhelp@xxxxxxxxxxxxx>
  • Date: Mon, 7 Jun 2004 13:00:46 -0400

Hi Kevin,

I was able to install the Thiel Impacto 600 as a share with no problem under
Windows XP Home and Windows 2000 Professional.  I'll check with Windows XP
PRO.  The dbt.elt file for beta 3 limits the lines per page for the Impacto
600 to 25, so I can't setup DBT exactly as you have yours.  Are you sure
about the latest beta build Monday, May 24, 2004?  I had a problem in beta 2
in the device settings tab and the only way to get out was to cancel and
that removed the embosser.

Best Regards,
Mark

----- Original Message ----- 
From: "Loeffler, Kevin J." <loeffler@xxxxxxxxxx>
To: <duxhelp@xxxxxxxxxxxxx>
Sent: Monday, June 07, 2004 11:46 AM
Subject: [duxhelp] Re: Unable to emboss


> With or without a file open, select Global->Embosser Setup.  Click on
> New.  Create a new setup
> name (i.e., THIEL).  Set the Embosser Model to Thiel Impacto 600, select
> Send to printer (our
> share is \\server\Thiel).  Change to the Device Settings tab and set the
> rightmost cell placement
> to 42, click OK.  Set Lines per page to 26 and check the Emboss in
> Interpoint checkbox.  Click OK.
>
> Opening up the Global->Embosser Setup menu immediately after the above
> shows NO embosser listed
> in the setup listing.  The same applies for creating an embosser setup
> entry using Document->
> Embosser Setup (with a file open, obviously).
>
> Kevin--
>
> -----Original Message-----
> From: duxhelp-bounce@xxxxxxxxxxxxx [mailto:duxhelp-bounce@xxxxxxxxxxxxx]
> On Behalf Of David Holladay
> Sent: Monday, June 07, 2004 11:36 AM
> To: duxhelp@xxxxxxxxxxxxx
> Subject: [duxhelp] Re: Unable to emboss
>
> I am not familiar with any reports of "missing embosser configurations".
> Many have complained of the inability to delete the last configuration.
> Could you be specific as to the steps you take to get to this
> frustrating
> situation?
>
> -- David Holladay
>
>
> At 10:28 AM 6/7/2004 -0500, you wrote:
> >I have several users who have (a) opened old Duxbury files and (b)
> >created new files in
> >the latest beta build who are unable to emboss at all.  Both the global
> >and document
> >embosser settings disappear immediately after being created.  I've had
> >the users save
> >the document after setting the embossers up and then reopen it and the
> >embossers are
> >nowhere to be found.  Opening up the embosser settings (either one)
> >immediately after
> >creating the profile reverts back to no embosser configured.  Am I
> >missing something, or
> >is anyone else running into this problem?  We are running Windows XP
> Pro
> >and use a networked
> >Thiel Impacto 600 (which doesn't matter - setting the embosser to use
> >LPT1 also results in
> >a lost embosser profile).
> >
> >Kevin--
> >
> >-----------------------------------
> >Kevin J. Loeffler
> >System Administrator
> >TAEVIS
> >Purdue University
> >509 Harrison Street
> >West Lafayette, IN 47907-2025
> >Office phone: (765) 496-2856
> >Email: loeffler@xxxxxxxxxx
> >http://www.taevisonline.purdue.edu
> >
> >* * *
> >* This message is via list duxhelp at freelists.org.
> >* To unsubscribe, send a blank message with
> >*   unsubscribe
> >* as the subject to <duxhelp-request@xxxxxxxxxxxxx>. You may also
> >* subscribe, unsubscribe, and set vacation mode and other subscription
> >* options by visiting http://www.freelists.org.  The list archive
> >* is also located there.
> >* Duxbury Systems' web site is http://www.duxburysystems.com
> >* * *
> >
> * * *
> * This message is via list duxhelp at freelists.org.
> * To unsubscribe, send a blank message with
> *   unsubscribe
> * as the subject to <duxhelp-request@xxxxxxxxxxxxx>. You may also
> * subscribe, unsubscribe, and set vacation mode and other subscription
> * options by visiting http://www.freelists.org.  The list archive
> * is also located there.
> * Duxbury Systems' web site is http://www.duxburysystems.com
> * * *
>
>
> * * *
> * This message is via list duxhelp at freelists.org.
> * To unsubscribe, send a blank message with
> *   unsubscribe
> * as the subject to <duxhelp-request@xxxxxxxxxxxxx>. You may also
> * subscribe, unsubscribe, and set vacation mode and other subscription
> * options by visiting http://www.freelists.org.  The list archive
> * is also located there.
> * Duxbury Systems' web site is http://www.duxburysystems.com
> * * *

* * *
* This message is via list duxhelp at freelists.org.
* To unsubscribe, send a blank message with
*   unsubscribe
* as the subject to <duxhelp-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting http://www.freelists.org.  The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *

Other related posts: