Hello David, we just purchased a Gemini Braille printer. It seems to be ok with DBT 10.5 versions but it is not working with 10.6. It gives a message "There is a communication problem. Please check the cable and the soft ware" We use driver Nippon Gemini (small spacing) for embosser model. The model that seems to be working with DBT 10.5. Can you suggest any thing? Privacy Disclaimer - Français à suivre This e-mail message (including attachments, if any) is intended for the use of the individual or entity to which it is addressed and may contain information that is priviledged, proprietary, confidential. If you are not the intended recipient, you are notified that any dissemination, distribution, or copy of this communication is strictly prohibited. If you have received this communication in error, please notify the sender and erase this e-mail message immediately. ----------------------------------------------------------------------------------- Déclaration de confidentialité Le présent courrier électronique (y compris les pièces qui y sont annexées, le cas échéant) s'adresse au destinataire indiqué et peut contenir des renseignements de caractère privé ou confidentiel. Si vous n'êtes pas le destinataire de ce document, nous vous signalons qu'il est strictement interdit de le diffuser, de le distribuer ou de le reproduire. Si ce message vous a été transmis par erreur, veuillez en informer l'expéditeur et le supprimer immédiatement. * * * * This message is via list duxhelp at freelists.org. * To unsubscribe, send a blank message with * unsubscribe * as the subject to <duxhelp-request@xxxxxxxxxxxxx>. You may also * subscribe, unsubscribe, and set vacation mode and other subscription * options by visiting //www.freelists.org. The list archive * is also located there. * Duxbury Systems' web site is http://www.duxburysystems.com * * *