[duxhelp] Re: DBT 10.6 RC1 and 13 inch paper

  • From: "Peter Sullivan" <peter@xxxxxxxxxx>
  • To: <duxhelp@xxxxxxxxxxxxx>
  • Date: Fri, 14 Jul 2006 21:37:13 -0400

David,

George is going to try to get David running.  We can then pick up a tested
emb.elt section from David for the next go 'round, which won't be long in
coming.

- Peter 

-----Original Message-----
From: duxhelp-bounce@xxxxxxxxxxxxx [mailto:duxhelp-bounce@xxxxxxxxxxxxx] On
Behalf Of David Holladay
Sent: Friday, July 14, 2006 4:50 PM
To: duxhelp@xxxxxxxxxxxxx
Subject: [duxhelp] Re: DBT 10.6 RC1 and 13 inch paper

I wanted to fix the Thiel Beta X3 for 13 inch paper in the emb.elt table.

However, no one responded to my repeated e-mails for the braille cell
dimensions.

So I only added 13 inch paper size for those embossers for which I could get
solid numbers.

-- David Holladay

At 08:05 AM 7/7/2006, you wrote:
>Hi David, (and David H)
>
>The good news is that you should be OK with your Index Basic "S" and 
>"D" embossers, or even one of the Generic options.
>
>The bad news is that it would appear that David (H) only got as far 
>down the emb.elt file adding 13" form size as, "Index Basic S".
>
>Thereafter there are no references to "13", which of course includes 
>the Thiel Beta-X3, of which you have two.
>
>The fix is relatively easy.  I just hope this can be "patched", rather 
>than have to build an RC2.
>
>George.
>
>-----Original Message-----
>From: duxhelp-bounce@xxxxxxxxxxxxx
>[mailto:duxhelp-bounce@xxxxxxxxxxxxx] On Behalf Of David Spybey
>Sent: 07 July 2006 13:31
>To: duxhelp@xxxxxxxxxxxxx
>Subject: [duxhelp] Re: DBT 10.6 RC1 and 13 inch paper
>
>10.6 RC1 seems to have loaded and activated OK. This was once I had 
>deleted previous versions.
>
>Please can you let me know what stage the issue of 13inch paper has 
>reached.
>At the moment there still do not seem to be any settings that allow for 
>this size.
>
>
>David Spybey
>
>
>-----Original Message-----
>From: duxhelp-bounce@xxxxxxxxxxxxx
>[mailto:duxhelp-bounce@xxxxxxxxxxxxx]
>On Behalf Of Mike Gorse
>Sent: 06 July 2006 02:01
>To: duxhelp@xxxxxxxxxxxxx
>Subject: [duxhelp] DBT 10.6 RC1 has been posted.
>
>We have posted DBT 10.6 release candidate 1 at 
>http://partners.duxburysystems.com/beta.asp?product=DBT
>
>We will release this build as DBT 10.6 unless someone finds a very good 
>reason not to within the next week or so.
>
>You may get an error deactivating earlier versions of 10.6; do not 
>worry
>
>about this.  Up until now, we have been using a test database for our
>10.6
>activations while we revised our activation procedure, but we are now 
>using what will be the live database, so it has no record of previous 
>10.6 activations.
>
>Best regards,
>-Mike
>
>* * *
>* This message is via list duxhelp at freelists.org.
>* To unsubscribe, send a blank message with
>*   unsubscribe
>* as the subject to <duxhelp-request@xxxxxxxxxxxxx>. You may also
>* subscribe, unsubscribe, and set vacation mode and other subscription
>* options by visiting http://www.freelists.org.  The list archive
>* is also located there.
>* Duxbury Systems' web site is http://www.duxburysystems.com
>* * *
>* * *
>* This message is via list duxhelp at freelists.org.
>* To unsubscribe, send a blank message with
>*   unsubscribe
>* as the subject to <duxhelp-request@xxxxxxxxxxxxx>. You may also
>* subscribe, unsubscribe, and set vacation mode and other subscription
>* options by visiting http://www.freelists.org.  The list archive
>* is also located there.
>* Duxbury Systems' web site is http://www.duxburysystems.com
>* * *
>* * *
>* This message is via list duxhelp at freelists.org.
>* To unsubscribe, send a blank message with
>*   unsubscribe
>* as the subject to <duxhelp-request@xxxxxxxxxxxxx>. You may also
>* subscribe, unsubscribe, and set vacation mode and other subscription
>* options by visiting http://www.freelists.org.  The list archive
>* is also located there.
>* Duxbury Systems' web site is http://www.duxburysystems.com
>* * *

* * *
* This message is via list duxhelp at freelists.org.
* To unsubscribe, send a blank message with
*   unsubscribe
* as the subject to <duxhelp-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting http://www.freelists.org.  The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *


* * *
* This message is via list duxhelp at freelists.org.
* To unsubscribe, send a blank message with
*   unsubscribe
* as the subject to <duxhelp-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting http://www.freelists.org.  The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *

Other related posts: