Dear Philippe: Thank you for the image files. They show that you altered the default location for the Elekul code from: C:\DuxBETA\Drivers\Print55\print55.exe to: C:\DuxBETA\Drivers\Print55\wprint55.exe ^ | | [I am trying to construct an arrow pointing at the 'w'] This is not good. DBT wants to work with the DOS program print55.exe wprint55.exe (note the 'w') is a Windows program with a different set of parameters and operations. Please change this back to the print55.exe, and try again. I suspect you will get better results. -- David Holladay At 11:00 AM 7/13/2004 +0200, you wrote: >Hello David, > >I join JPEG 1 to 6 to show you the several settings so you asked: >Result: DBT cut only a blank page, no embossing. >See the DOS windows who's tell about problems. > > > If you configure output as follow: > Embosser Model: Interpoint NV Elekul 55 > Setup name : (your choice) > Write to Port: COM1 > > Baud: 19200 > Parity: No parity > Data bits: 8 > Stop bits: 1 > Handshaking: Software (Xon/Xoff) > > Choose a form size such as: "Wide paper, 11 inches long" > (just tell us which one you pick) > > Send a simple file (1-3 braille pages). > > Do you get any output? > > -- David Holladay > <<1.JPG>> <<2.JPG>> <<3.JPG>> <<4.JPG>> <<5.JPG>> <<6.jpg>> > >Attachment Converted: "C:\TDSNET\EUDORA\Attach\1.jpg" > >Attachment Converted: "C:\TDSNET\EUDORA\Attach\2.jpg" > >Attachment Converted: "C:\TDSNET\EUDORA\Attach\3.jpg" > >Attachment Converted: "C:\TDSNET\EUDORA\Attach\4.jpg" > >Attachment Converted: "C:\TDSNET\EUDORA\Attach\5.jpg" > >Attachment Converted: "C:\TDSNET\EUDORA\Attach\6.jpg" > * * * * This message is via list duxhelp at freelists.org. * To unsubscribe, send a blank message with * unsubscribe * as the subject to <duxhelp-request@xxxxxxxxxxxxx>. You may also * subscribe, unsubscribe, and set vacation mode and other subscription * options by visiting //www.freelists.org. The list archive * is also located there. * Duxbury Systems' web site is http://www.duxburysystems.com * * *