[drivingpairs] Re: adding a spring to a pole

Good job, Jerry I agree, springs on poles are  wirht their wait in gold.
I prefer ridgid ploes
Tin
----- Original Message -----
From: <Shadbelly4@xxxxxxx>
To: <drivingpairs@xxxxxxxxxxxxx>
Sent: Sunday, November 24, 2002 8:17 AM
Subject: [drivingpairs] Re: adding a spring to a pole


>
> <PRE>on some antique carriages there was a spring that went from the pole
to a
> sturdy part of the floor board or the axle You will need a couple of eye
> bolts and a sturdy spring like a short garage spring I've seen them in
bigger
> hardware stores or you can contact carriage machine shop in Bird in Hand
Pa
> they use a similar set up on their flyer and eagle carriage to hold the
pole
> good luck
> _________________________________________________________
> To Unsubscribe, change to Digest or Vacation mode go to:
> http://www.drivingpairs.com/dpmem.html
> `````````````````````````````````````````````````````````
>


_________________________________________________________
To Unsubscribe, change to Digest or Vacation mode go to: 
http://www.drivingpairs.com/dpmem.html
`````````````````````````````````````````````````````````

Other related posts: