[ddots-l] Re: sonar 6 producer and tascam fw 1884

Sean wrote: Phil, First the MIDI 1 and the control need to be selected in the 
MIDI devices under the (Tools) MIDI menu.  Otherwise, they wont be available in 
the control
surface menu. 

Phil replied: I understand what you mean and should have pointed that out 
really.  Meaning that I should have stated that you need to go into the MIDI 
options dialog box, under the options menu in Sonar and check the check box for 
the FW1884 control MIDI port in the MIDI input and output part of the dialog 
box.  Then, when adding a control surface from within the control surfaces 
dialog box, choose the FW1884 control MIDI port as the input and output port.  
Thanks for reminding me Sean, smile!

Regards, Phil Muir

P J Muir Productions,
Music And Audio Production
Telephone: US (615) 713-2021  
UK+44-1747-821-794
Mobile: UK +44-7968-136-246
E-mail:
info@xxxxxxxxxxxx
URL:
www.philmuir.com/ 
  ----- Original Message ----- 
  From: Sean A. Cummins 
  To: ddots-l@xxxxxxxxxxxxx 
  Sent: Tuesday, April 29, 2008 4:02 PM
  Subject: [ddots-l] Re: sonar 6 producer and tascam fw 1884


  Phil,

  First the MIDI 1 and the control need to be selected in the MIDI devices 
under the (Tools) MIDI menu.  Otherwise, they wont be available in the control 
surface menu.

  Sean
    ----- Original Message ----- 
    From: Phil Muir 
    To: ddots-l@xxxxxxxxxxxxx 
    Sent: Tuesday, April 29, 2008 7:31 AM
    Subject: [ddots-l] Re: sonar 6 producer and tascam fw 1884


    Jim.  I would delete the Tascam FW1884 control surface.  Then, when you add 
it again in the control surfaces dialog box, set both the input and output 
ports to the FW1884 control port.

    Reg    ards, Phil Muir

    P J Muir Productions,
    Music And Audio Production
    Telephone: US (615) 713-2021  
    UK+44-1747-821-794
    Mobile: UK +44-7968-136-246
    E-mail:
    info@xxxxxxxxxxxx
    URL:
    www.philmuir.com/ 
      ----- Original Message ----- 
      From: jim mcauslan 
      To: ddots-l@xxxxxxxxxxxxx 
      Sent: Tuesday, April 29, 2008 1:02 PM
      Subject: [ddots-l] sonar 6 producer and tascam fw 1884


      Hi list,

      Trying to use the tascam transport keys etc with sonar 6.225.  When I 
look in the options, controlers surfaces, I find that  the input and out put 
for the tascam = port not assigned.  I tried to assign both input and output 
but when I looked again at the options the same message is there.
      What am I doing wrong?

      Jim McAuslan from sunny Findhorn
      Minds are like parachutes, they work best when open
      T 01309-690-124
      M 07875-670-833
      e mail
      axdr89@xxxxxxxxxxxxx
      Skype jmca011

Other related posts: