[ddots-l] Re: sonar 6 producer and tascam fw 1884

Phil,

First the MIDI 1 and the control need to be selected in the MIDI devices under 
the (Tools) MIDI menu.  Otherwise, they wont be available in the control 
surface menu.

Sean
  ----- Original Message ----- 
  From: Phil Muir 
  To: ddots-l@xxxxxxxxxxxxx 
  Sent: Tuesday, April 29, 2008 7:31 AM
  Subject: [ddots-l] Re: sonar 6 producer and tascam fw 1884


  Jim.  I would delete the Tascam FW1884 control surface.  Then, when you add 
it again in the control surfaces dialog box, set both the input and output 
ports to the FW1884 control port.

  Reg    ards, Phil Muir

  P J Muir Productions,
  Music And Audio Production
  Telephone: US (615) 713-2021  
  UK+44-1747-821-794
  Mobile: UK +44-7968-136-246
  E-mail:
  info@xxxxxxxxxxxx
  URL:
  www.philmuir.com/ 
    ----- Original Message ----- 
    From: jim mcauslan 
    To: ddots-l@xxxxxxxxxxxxx 
    Sent: Tuesday, April 29, 2008 1:02 PM
    Subject: [ddots-l] sonar 6 producer and tascam fw 1884


    Hi list,

    Trying to use the tascam transport keys etc with sonar 6.225.  When I look 
in the options, controlers surfaces, I find that  the input and out put for the 
tascam = port not assigned.  I tried to assign both input and output but when I 
looked again at the options the same message is there.
    What am I doing wrong?

    Jim McAuslan from sunny Findhorn
    Minds are like parachutes, they work best when open
    T 01309-690-124
    M 07875-670-833
    e mail
    axdr89@xxxxxxxxxxxxx
    Skype jmca011

Other related posts: