[ddots-l] Re: sonar 6 producer and tascam fw 1884
- From: "Phil Muir" <ddots@xxxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Tue, 29 Apr 2008 15:31:20 +0100
Jim. I would delete the Tascam FW1884 control surface. Then, when you add it
again in the control surfaces dialog box, set both the input and output ports
to the FW1884 control port.
Reg ards, Phil Muir
P J Muir Productions,
Music And Audio Production
Telephone: US (615) 713-2021
UK+44-1747-821-794
Mobile: UK +44-7968-136-246
E-mail:
info@xxxxxxxxxxxx
URL:
www.philmuir.com/
----- Original Message -----
From: jim mcauslan
To: ddots-l@xxxxxxxxxxxxx
Sent: Tuesday, April 29, 2008 1:02 PM
Subject: [ddots-l] sonar 6 producer and tascam fw 1884
Hi list,
Trying to use the tascam transport keys etc with sonar 6.225. When I look in
the options, controlers surfaces, I find that the input and out put for the
tascam = port not assigned. I tried to assign both input and output but when I
looked again at the options the same message is there.
What am I doing wrong?
Jim McAuslan from sunny Findhorn
Minds are like parachutes, they work best when open
T 01309-690-124
M 07875-670-833
e mail
axdr89@xxxxxxxxxxxxx
Skype jmca011
Other related posts:
