[ddots-l] Re: sonar 4 and vsts

How do you set up so that only certain parameters appear on the inspecter?
Let's say in autotune, you want retune speed and tracking slider on the 
inspecter, and you don't need other parameters like scale, vibrato, and so 
on.

Chi
----- Original Message ----- 
From: "Gordon Kent" <dbmusic@xxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Thursday, April 28, 2005 9:33 AM
Subject: [ddots-l] Re: sonar 4 and vsts


> Kevin:
> If any of the parameters of the atomosphere synth are accessible in the
> track inspector, which I doubt, they would be listed below the actual name
> of the plug-in.  Pressing enter on the name of the plug-in itself will 
> just
> open up its inaccessible properties window.
> Gord
> ----- Original Message ----- 
> From: "Kevin L. Gibbs" <kevjazz@xxxxxxx>
> To: <ddots-l@xxxxxxxxxxxxx>
> Sent: Wednesday, April 27, 2005 8:43 PM
> Subject: [ddots-l] Re: sonar 4 and vsts
>
>
> Gord,
> if I put a VST in the effecs bin of an audio track, such as
> Atmosphere, and then opent the track inspector for that audio track and
> go to the effects tab and then select the third display state, I can see
> and highlight the VST in the Effects Bin.  When I hit the applications
> key, I don't get a reassign option.  I get the following
> Upon highlighting the VST, JAWS says," Atmosphere Effect.  Press
> Enter to open this effect's dialog."
> If I choose the applications key, JAWS says, "Applications.
> Context menu.  Delete."  Down arrowing yields
> "Bypass Bin, Arm Parameter, Audio Effects Submenu, DXI Submenu."
> There's no reassign option.  I have seen that option but can't
> remember the situation that gave it to me.
> If I hit enter to open the DXI's effects dialog, I get the graphical
> interface for Atmosphere.  Since I can see it, I can move around with a
> mouse, or I can route JAWS to PC and arrow until I hear JAWS start
> spelling words one letter at a time.  If I get in the right box, I can
> open the drop down menus that allow me to select banks and patches.
> However, like in the case of V Sampler 3, there's really no way to get
> there without looking.  In fact, it's even worse than V Sampler because,
> at least in that case, you had a semi-work-around more or less.  In this
> case, I can't think of one.
> Kevin
>
>
> -----Original Message-----
> From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
> On Behalf Of Gordon Kent
> Sent: Thursday, April 21, 2005 12:13 PM
> To: ddots-l@xxxxxxxxxxxxx
> Subject: [ddots-l] Re: sonar 4 and vsts
>
>
> Press the applications key and up arrow to the reassign submenu, then
> right
> arrow and you'll see a list of all the available parameters.  Press
> enter on
> the one you want and you'll be right on that parameter and ready to
> change
> it.
> Gord
> ----- Original Message ----- 
> From: "Kevin L. Gibbs" <kevjazz@xxxxxxx>
> To: <ddots-l@xxxxxxxxxxxxx>
> Sent: Thursday, April 21, 2005 11:49 AM
> Subject: [ddots-l] Re: sonar 4 and vsts
>
>
> How do you reassign the wigits?
> Kevin
>
> -----Original Message-----
> From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
> On Behalf Of Gordon Kent
> Sent: Thursday, April 21, 2005 8:02 AM
> To: ddots-l@xxxxxxxxxxxxx
> Subject: [ddots-l] Re: sonar 4 and vsts
>
>
> Well, as I said, directixer has an option that will expose any
> automatable parameter on many soft synths and effect plug-ins in a list
> box, bypassing the graphical display completely.  The track inspector
> can only display four parameters at a time, so you need to reassign the
> four widgets to display other parameters.  The advantage to this method
> is that you can automate any of these parameters in  Sonar so that they
> can be changed from within your project. Gord
> ----- Original Message ----- 
> From: "Jeanette Contant-Galitello" <jeanette@xxxxxxxx>
> To: <ddots-l@xxxxxxxxxxxxx>
> Sent: Wednesday, April 20, 2005 5:00 PM
> Subject: [ddots-l] Re: sonar 4 and vsts
>
>
> So if one could choose between Cakewalk VST wrapper and the directixer,
> the directixer would be better? Can you please explain why it is better?
> I have only used the cakewalk VST wrapper so far. Thanks. Jeanette
> ----- Original Message ----- 
>  From: Gordon Kent
>  To: ddots-l@xxxxxxxxxxxxx
>  Sent: Wednesday, April 20, 2005 9:05 PM
>  Subject: [ddots-l] Re: sonar 4 and vsts
>
>
>  Sonar does include the cakewalk vst wrapper.  The advantage of using
>  directixer is that the parameters of many plug-ins can be exposed from
>  within the property window of the plug-in itself.  If you use the
> cakewalk
>  wrapper, you'll need to access the parameters from within the track
>  inspector.  This is certainly a viable alternative now.
>  Gord
>  ----- Original Message ----- 
>  From: "Rod" <roddj12@xxxxxxxxxxx>
>  To: <ddots-l@xxxxxxxxxxxxx>
>  Sent: Wednesday, April 20, 2005 10:21 AM
>  Subject: [ddots-l] sonar 4 and vsts
>
>
>  If I have sonar 4, do I still need to get Directixer?
>  Isn't there a plugin that  does the work?
>  thanks.
>
>  Rod
>
>  MSN: roddj12@xxxxxxxxxxx
>  IM: Roddy12RA
>
>  ===================
>  "For it is a very remarkable thing that there are no men, not even the
>  insane, so dull and stupid that they cannot put words together in a
> manner
>  to convey their thoughts." (Philosopher Descartes).
>
>  "No power on earth can stop an idea whose time has come."  Victor
> Hugo.
>
>  ----- Original Message -----
>  From: "Neville Peter" <neville@xxxxxxxxxxxxxxxx>
>  To: <ddots-l@xxxxxxxxxxxxx>
>  Sent: Tuesday, April 19, 2005 11:50 AM
>  Subject: [ddots-l] Re: Tascam vw1082 working well.
>
>
>  > I am still new to audio recording. Can someone explane what the
> taskam is
>  > use for?
>  > ----- Original Message -----
>  > From: "Ricky Prevatte" <rickyprevatte@xxxxxxxxxxxxx>
>  > To: <ddots-l@xxxxxxxxxxxxx>
>  > Sent: Sunday, April 17, 2005 11:22 PM
>  > Subject: [ddots-l] Tascam vw1082 working well.
>  >
>  >
>  > > The subject says it all When all else fails get some one to read
> the
>  > > manual fore you and then get to enjoy your product.  I set the
> buffers
>  got
>  > > the ports set up and found that jaws reads the tascam control
> panel well
>  I
>  > > am really excided about this piece.
>  > > Bounder Trio
>  > > Ricky & Wendy
>  > > and guide-dog, Sissy
>  > > '99 36S Ford V10 Banks power
>  > > Durango in tow
>  > > Blue Ox, SMI braking and talking GPS
>  > > By God's grace
>  > > ** To leave the list, click on the immediately-following link:-
>  > > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>  > > ** If this link doesn't work then send a message to:
>  > > ** ddots-l-request@xxxxxxxxxxxxx
>  > > ** and in the Subject line type
>  > > ** unsubscribe
>  > > ** For other list commands such as vacation mode, click on the
>  > > ** immediately-following link:-
>  > > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>  > > ** or send a message, to
>  > > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>  > >
>  > >
>  >
>  >
>  > ** To leave the list, click on the immediately-following link:-
>  > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>  > ** If this link doesn't work then send a message to:
>  > ** ddots-l-request@xxxxxxxxxxxxx
>  > ** and in the Subject line type
>  > ** unsubscribe
>  > ** For other list commands such as vacation mode, click on the
>  > ** immediately-following link:-
>  > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>  > ** or send a message, to
>  > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>  >
>  >
>  ** To leave the list, click on the immediately-following link:-
>  ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>  ** If this link doesn't work then send a message to:
>  ** ddots-l-request@xxxxxxxxxxxxx
>  ** and in the Subject line type
>  ** unsubscribe
>  ** For other list commands such as vacation mode, click on the
>  ** immediately-following link:-
>  ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>  ** or send a message, to
>  ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>
>  ** To leave the list, click on the immediately-following link:-
>  ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>  ** If this link doesn't work then send a message to:
>  ** ddots-l-request@xxxxxxxxxxxxx
>  ** and in the Subject line type
>  ** unsubscribe
>  ** For other list commands such as vacation mode, click on the
>  ** immediately-following link:-
>  ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>  ** or send a message, to
>  ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>
> 
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to 
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: