[ddots-l] Re: sonar 4 and vsts

Kevin:
If any of the parameters of the atomosphere synth are accessible in the 
track inspector, which I doubt, they would be listed below the actual name 
of the plug-in.  Pressing enter on the name of the plug-in itself will just 
open up its inaccessible properties window.
Gord
----- Original Message ----- 
From: "Kevin L. Gibbs" <kevjazz@xxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Wednesday, April 27, 2005 8:43 PM
Subject: [ddots-l] Re: sonar 4 and vsts


Gord,
if I put a VST in the effecs bin of an audio track, such as
Atmosphere, and then opent the track inspector for that audio track and
go to the effects tab and then select the third display state, I can see
and highlight the VST in the Effects Bin.  When I hit the applications
key, I don't get a reassign option.  I get the following
Upon highlighting the VST, JAWS says," Atmosphere Effect.  Press
Enter to open this effect's dialog."
If I choose the applications key, JAWS says, "Applications.
Context menu.  Delete."  Down arrowing yields
"Bypass Bin, Arm Parameter, Audio Effects Submenu, DXI Submenu."
There's no reassign option.  I have seen that option but can't
remember the situation that gave it to me.
If I hit enter to open the DXI's effects dialog, I get the graphical
interface for Atmosphere.  Since I can see it, I can move around with a
mouse, or I can route JAWS to PC and arrow until I hear JAWS start
spelling words one letter at a time.  If I get in the right box, I can
open the drop down menus that allow me to select banks and patches.
However, like in the case of V Sampler 3, there's really no way to get
there without looking.  In fact, it's even worse than V Sampler because,
at least in that case, you had a semi-work-around more or less.  In this
case, I can't think of one.
Kevin


-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
On Behalf Of Gordon Kent
Sent: Thursday, April 21, 2005 12:13 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: sonar 4 and vsts


Press the applications key and up arrow to the reassign submenu, then
right
arrow and you'll see a list of all the available parameters.  Press
enter on
the one you want and you'll be right on that parameter and ready to
change
it.
Gord
----- Original Message ----- 
From: "Kevin L. Gibbs" <kevjazz@xxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Thursday, April 21, 2005 11:49 AM
Subject: [ddots-l] Re: sonar 4 and vsts


How do you reassign the wigits?
Kevin

-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
On Behalf Of Gordon Kent
Sent: Thursday, April 21, 2005 8:02 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: sonar 4 and vsts


Well, as I said, directixer has an option that will expose any
automatable parameter on many soft synths and effect plug-ins in a list
box, bypassing the graphical display completely.  The track inspector
can only display four parameters at a time, so you need to reassign the
four widgets to display other parameters.  The advantage to this method
is that you can automate any of these parameters in  Sonar so that they
can be changed from within your project. Gord
----- Original Message ----- 
From: "Jeanette Contant-Galitello" <jeanette@xxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Wednesday, April 20, 2005 5:00 PM
Subject: [ddots-l] Re: sonar 4 and vsts


So if one could choose between Cakewalk VST wrapper and the directixer,
the directixer would be better? Can you please explain why it is better?
I have only used the cakewalk VST wrapper so far. Thanks. Jeanette
----- Original Message ----- 
  From: Gordon Kent
  To: ddots-l@xxxxxxxxxxxxx
  Sent: Wednesday, April 20, 2005 9:05 PM
  Subject: [ddots-l] Re: sonar 4 and vsts


  Sonar does include the cakewalk vst wrapper.  The advantage of using
  directixer is that the parameters of many plug-ins can be exposed from
  within the property window of the plug-in itself.  If you use the
cakewalk
  wrapper, you'll need to access the parameters from within the track
  inspector.  This is certainly a viable alternative now.
  Gord
  ----- Original Message ----- 
  From: "Rod" <roddj12@xxxxxxxxxxx>
  To: <ddots-l@xxxxxxxxxxxxx>
  Sent: Wednesday, April 20, 2005 10:21 AM
  Subject: [ddots-l] sonar 4 and vsts


  If I have sonar 4, do I still need to get Directixer?
  Isn't there a plugin that  does the work?
  thanks.

  Rod

  MSN: roddj12@xxxxxxxxxxx
  IM: Roddy12RA

  ===================
  "For it is a very remarkable thing that there are no men, not even the
  insane, so dull and stupid that they cannot put words together in a
manner
  to convey their thoughts." (Philosopher Descartes).

  "No power on earth can stop an idea whose time has come."  Victor
Hugo.

  ----- Original Message -----
  From: "Neville Peter" <neville@xxxxxxxxxxxxxxxx>
  To: <ddots-l@xxxxxxxxxxxxx>
  Sent: Tuesday, April 19, 2005 11:50 AM
  Subject: [ddots-l] Re: Tascam vw1082 working well.


  > I am still new to audio recording. Can someone explane what the
taskam is
  > use for?
  > ----- Original Message -----
  > From: "Ricky Prevatte" <rickyprevatte@xxxxxxxxxxxxx>
  > To: <ddots-l@xxxxxxxxxxxxx>
  > Sent: Sunday, April 17, 2005 11:22 PM
  > Subject: [ddots-l] Tascam vw1082 working well.
  >
  >
  > > The subject says it all When all else fails get some one to read
the
  > > manual fore you and then get to enjoy your product.  I set the
buffers
  got
  > > the ports set up and found that jaws reads the tascam control
panel well
  I
  > > am really excided about this piece.
  > > Bounder Trio
  > > Ricky & Wendy
  > > and guide-dog, Sissy
  > > '99 36S Ford V10 Banks power
  > > Durango in tow
  > > Blue Ox, SMI braking and talking GPS
  > > By God's grace
  > > ** To leave the list, click on the immediately-following link:-
  > > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
  > > ** If this link doesn't work then send a message to:
  > > ** ddots-l-request@xxxxxxxxxxxxx
  > > ** and in the Subject line type
  > > ** unsubscribe
  > > ** For other list commands such as vacation mode, click on the
  > > ** immediately-following link:-
  > > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
  > > ** or send a message, to
  > > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
  > >
  > >
  >
  >
  > ** To leave the list, click on the immediately-following link:-
  > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
  > ** If this link doesn't work then send a message to:
  > ** ddots-l-request@xxxxxxxxxxxxx
  > ** and in the Subject line type
  > ** unsubscribe
  > ** For other list commands such as vacation mode, click on the
  > ** immediately-following link:-
  > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
  > ** or send a message, to
  > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
  >
  >
  ** To leave the list, click on the immediately-following link:-
  ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
  ** If this link doesn't work then send a message to:
  ** ddots-l-request@xxxxxxxxxxxxx
  ** and in the Subject line type
  ** unsubscribe
  ** For other list commands such as vacation mode, click on the
  ** immediately-following link:-
  ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
  ** or send a message, to
  ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq

  ** To leave the list, click on the immediately-following link:-
  ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
  ** If this link doesn't work then send a message to:
  ** ddots-l-request@xxxxxxxxxxxxx
  ** and in the Subject line type
  ** unsubscribe
  ** For other list commands such as vacation mode, click on the
  ** immediately-following link:-
  ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
  ** or send a message, to
  ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq



** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to 
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: