[ddots-l] Re: session drummer 2 for hip hop and R&b

OK I'll give that a try.

Thanks
  ----- Original Message ----- 
  From: Omar Binno 
  To: ddots-l@xxxxxxxxxxxxx 
  Sent: Wednesday, June 27, 2007 11:27 PM
  Subject: [ddots-l] Re: session drummer 2 for hip hop and R&b


  Once you insert it, you should get the dialogue box that says to use f4 to 
work in the session drummer. Then you go to "move to program," or something 
like that. It's the first option. Then you'll be on the program field. If you 
hit tab, you'll hear "program browser." You want to be in the program, not the 
program browser field. Once on "program," you right click and down arrow to 
"load program."

  Omar Binno

  www.omarbinno.com

  www.myspace.com/omarbinno
    ----- Original Message ----- 
    From: THOMAS DE ROSA 
    To: ddots-l@xxxxxxxxxxxxx 
    Sent: Wednesday, June 27, 2007 10:19 PM
    Subject: [ddots-l] Re: session drummer 2 for hip hop and R&b


    Yes,  I get sounds out of the general midi and the TTS1 and some sound out 
of the Roland groov. I am not able to get anything from session drummer after I 
set it up.  Do I need to load the sounds some where.
    Thanks for your help
      ----- Original Message ----- 
      From: Omar Binno 
      To: ddots-l@xxxxxxxxxxxxx 
      Sent: Wednesday, June 27, 2007 8:05 PM
      Subject: [ddots-l] Re: session drummer 2 for hip hop and R&b


      Are you able to get anything out of other softsynths?

      Omar Binno

      www.omarbinno.com

      www.myspace.com/omarbinno
        ----- Original Message ----- 
        From: THOMAS DE ROSA 
        To: ddots-l@xxxxxxxxxxxxx 
        Sent: Wednesday, June 27, 2007 8:03 PM
        Subject: [ddots-l] Re: session drummer 2 for hip hop and R&b


        Stacey,  I'm new at this and I can't get anything out of session 
drummer.  I
        have the input in audio and out on midi and try to get a program in 
session
        drummer going but nothing.  Can you give me some advice.

        Tom
        ----- Original Message -----
        From: "Stacy Bleeks" <sbleeks@xxxxxxxxxxxx>
        To: <ddots-l@xxxxxxxxxxxxx>
        Sent: Wednesday, June 27, 2007 1:03 AM
        Subject: [ddots-l] session drummer 2 for hip hop and R&b


        >
        >  was surprised to find out that Session Drummer 2 with Sonar 6 does 
not
        have
        > the variety of drumm patterns etc. as Sonar 5's Session Drummer.  Most
        > notable is the fact that there are no Dance, House, Hip Hop, R&B 
presets
        > available with Sonar 6 Session Drummer 2.
        >
        > Apparently you have to buy the hip hop r&b features to Session 
Drummer 2
        at
        > a cost of about $70  To find out more about SesSession Drummer 2 hip 
Hop
        > volume 1 visit.
        > http://www.synthtopia.com/content/2007/03/29/hip-hop-drum-samples/
        >
        > can we assume that these Session Drummer volumes will be accessible as
        they
        > are simply additions to the current interface?
        >
        > Stacy
        >
        > ** To leave the list, click on the immediately-following link:-
        > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
        > ** If this link doesn't work then send a message to:
        > ** ddots-l-request@xxxxxxxxxxxxx
        > ** and in the Subject line type
        > ** unsubscribe
        > ** For other list commands such as vacation mode, click on the
        > ** immediately-following link:-
        > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
        > ** or send a message, to
        > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
        >

        ** To leave the list, click on the immediately-following link:-
        ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
        ** If this link doesn't work then send a message to:
        ** ddots-l-request@xxxxxxxxxxxxx
        ** and in the Subject line type
        ** unsubscribe
        ** For other list commands such as vacation mode, click on the
        ** immediately-following link:-
        ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
        ** or send a message, to 
        ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: