[ddots-l] Re: session drummer 2 for hip hop and R&b

Yes,  I get sounds out of the general midi and the TTS1 and some sound out of 
the Roland groov. I am not able to get anything from session drummer after I 
set it up.  Do I need to load the sounds some where.
Thanks for your help
  ----- Original Message ----- 
  From: Omar Binno 
  To: ddots-l@xxxxxxxxxxxxx 
  Sent: Wednesday, June 27, 2007 8:05 PM
  Subject: [ddots-l] Re: session drummer 2 for hip hop and R&b


  Are you able to get anything out of other softsynths?

  Omar Binno

  www.omarbinno.com

  www.myspace.com/omarbinno
    ----- Original Message ----- 
    From: THOMAS DE ROSA 
    To: ddots-l@xxxxxxxxxxxxx 
    Sent: Wednesday, June 27, 2007 8:03 PM
    Subject: [ddots-l] Re: session drummer 2 for hip hop and R&b


    Stacey,  I'm new at this and I can't get anything out of session drummer.  I
    have the input in audio and out on midi and try to get a program in session
    drummer going but nothing.  Can you give me some advice.

    Tom
    ----- Original Message -----
    From: "Stacy Bleeks" <sbleeks@xxxxxxxxxxxx>
    To: <ddots-l@xxxxxxxxxxxxx>
    Sent: Wednesday, June 27, 2007 1:03 AM
    Subject: [ddots-l] session drummer 2 for hip hop and R&b


    >
    >  was surprised to find out that Session Drummer 2 with Sonar 6 does not
    have
    > the variety of drumm patterns etc. as Sonar 5's Session Drummer.  Most
    > notable is the fact that there are no Dance, House, Hip Hop, R&B presets
    > available with Sonar 6 Session Drummer 2.
    >
    > Apparently you have to buy the hip hop r&b features to Session Drummer 2
    at
    > a cost of about $70  To find out more about SesSession Drummer 2 hip Hop
    > volume 1 visit.
    > http://www.synthtopia.com/content/2007/03/29/hip-hop-drum-samples/
    >
    > can we assume that these Session Drummer volumes will be accessible as
    they
    > are simply additions to the current interface?
    >
    > Stacy
    >
    > ** To leave the list, click on the immediately-following link:-
    > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
    > ** If this link doesn't work then send a message to:
    > ** ddots-l-request@xxxxxxxxxxxxx
    > ** and in the Subject line type
    > ** unsubscribe
    > ** For other list commands such as vacation mode, click on the
    > ** immediately-following link:-
    > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
    > ** or send a message, to
    > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
    >

    ** To leave the list, click on the immediately-following link:-
    ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
    ** If this link doesn't work then send a message to:
    ** ddots-l-request@xxxxxxxxxxxxx
    ** and in the Subject line type
    ** unsubscribe
    ** For other list commands such as vacation mode, click on the
    ** immediately-following link:-
    ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
    ** or send a message, to 
    ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: