[ddots-l] Re: sample rate question

MessageI know that there have been some issues with recording softsynthes like 
Dimension Pro in earlier versions of Sonar at hi sample rates.  Personally, I 
would stick with 24 bit 44.1. but hay, that's just me.

Regards, Phil Muir
 
P J Muir Productions,
Music And Audio Production
Telephone: US (615) 713-2021  
UK+44-1747-821-794
Mobile: UK +44-7968-136-246
E-mail:
info@xxxxxxxxxxxx
URL:
www.philmuir.com/ 
  ----- Original Message ----- 
  From: Bob Reid Info 
  To: ddots-l@xxxxxxxxxxxxx 
  Sent: Wednesday, December 17, 2008 11:31 PM
  Subject: [ddots-l] Re: sample rate question


  I remember trying to record Dimension Pro at 96 KHZ and most of the patches 
were screwed up in some way.  Gordon Kent said at the time that high sampling 
rates had never truly been tested with Cake Talking but this may have changed 
recently.
  Bob.
    ----- Original Message ----- 
    From: Kevin Gibbs 
    To: ddots-l@xxxxxxxxxxxxx 
    Sent: Wednesday, December 17, 2008 5:59 PM
    Subject: [ddots-l] Re: sample rate question


    If you already recorded a project at a given sample rate, you're stuck with 
that sample rate for that project.  I'm pretty sure that the only way you can 
get your soft synths to record at 96K is to start a blank project with that 
setting.  The reason you're getting the unsupported error is because your 
original project may be recorded at a different sample rate, say, 48 or 44.1.  
In a pinch, you could copy your MIDI tracks and paste them into a new project 
at the desired sample rate if you don't wat to reperform your parts.  In 
addition, there are some cards that only record at certain sample rates.  It's 
possible at the Edirol you have will only go up to 48K.  You'll have to check 
your documentation or visit the web for more information on this.  
        
    Kevin
      -----Original Message-----
      From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] 
On Behalf Of Omar Binno
      Sent: Wednesday, December 17, 2008 4:39 PM
      To: ddots-l@xxxxxxxxxxxxx
      Subject: [ddots-l] sample rate question


      Hello,

      I'm trying to switch the sample rate on my edirol card to 96khz. However, 
when I open a sonar project, it won't play it and i get an error message that 
says something like, "the current audio format is not supported by the 
soundcard," or something like that. I know the rate is switched to 96 in 
sonar's audio options. The only audio in this project is softsynths. My only 
guess is that the softsynths don't support 96khz sampling rate. Is that 
correct? If that's the case: is there a way to record/convert those instruments 
so that they will play at 96khz?

      Thanks.


      OMAR BINNO
      AIM: LOD1116
      SKYPE: obinno1
      WEBSITE: www.omarbinno.com

Other related posts: