[ddots-l] Re: routing effects
- From: "Steve Wicketts" <steve.wicketts@xxxxxxxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Fri, 22 May 2009 12:14:00 +0100
Hi All,
I mentioned on an earlier email about routing effects, I forgot to put I'm
using Sonar 7 encase there maybe differences on the newer systems.
Just to recap, I understand how to rout effects through hardware mixers and
effects units.
The problem I'm having is thinking virtual, I can't seem to quite get my head
around this, I'm not managing to understand the help files on this one.
I know it's a pain but please could one of you guys send a simple step by step
on how to set up the busses, how to assign effects to them and finally
how to send the chosen tracks through them.
It would be very much appreciated.
Steve W
www.jerryleelewis.co.uk
----- Original Message -----
From: Darren H
To: ddots-l@xxxxxxxxxxxxx
Sent: Friday, May 22, 2009 7:02 AM
Subject: [ddots-l] Re: routing effects
Hi Steve.
don't beat yourself up about this one because I can't get my head around it
either, even with the great help files.
I think it might have something to do with setting the outputs to auxe
tracks? then going to the bus pain and setting the effect in the corresponding
auxe track.
but, that's just me barking, whether I'm up the right tree or not is another
matter entirely.
Cheers
Darren
----- Original Message -----
From: Steve Wicketts
To: ddtots
Sent: Thursday, May 21, 2009 11:56 PM
Subject: [ddots-l] routing effects
Hi All,
I've been adding effects to my project by using the application key.
I'm aware it's easier on the system if you apply effects to a bus then send
the tracks through the bus.
I do this all the time with hardwhere , I use a Fostex 12 into 8 into two
mixer with external effects.
The problem I'm having is thinking virtual, I can't seem to quite get my
head around this, I'm not being able to understand the help files on this one.
I know it's a pain but please could one of you guys send me an simple step
by step on how to set up the busses and how to assign effects to them and
finally how to send the chosen tracks through them.
I know I must seem a pain, it's just it's all still quite knew to me.
Steve W
www.jerryleelewis.co.uk
Other related posts: