[ddots-l] Re: reading peaklevels [SaferSurf.com Status: eMail virus free]

The best way to do this is to do the following:
1. Go to the bus pane (shift down arrow), and make sure you have a bus that you are not using for an aux effect. If you started with one of the ct templates, you should have one called "master."
2. Return to the track pane (shift up arrow), and Select all the audio tracks. Don't worry about the from and thru.
3. Go to the track menu (alt t), then go to the properties sub menu and choose output.
4. You should see a list of all the audio tracks. Make sure they are all ch3ecked, then tab over to the outputs and select master. Tis will assign all the tracks to the master output.
5. Go back to the bus pane and highlight the master bus. Play some of the project, and ten press f2 and you should see a meter reading for the master bus.
Gord
----- Original Message ----- From: "Oliver Zenz" <o-zenz@xxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Tuesday, August 30, 2005 9:30 AM
Subject: [ddots-l] reading peaklevels [SaferSurf.com Status: eMail virus free]


Hi all,

I have one question:

I made a project within 7 Audiotracks.
Now, 3 of these Audiotracks are with each 2 effects, the others are
completely dry.
Now I would like to read the Audiometers for all tracks together to find out
if the mix is round about 0 db.

While playing the song I press F2 to hear what the level is. - Now it seams
to me, that the level is only read for the track, where the focus is on.
Marking all tracks by pressing STRG and 3 times Enter makes no differens.
does anny body have an idea how to solf this problem?

thank you very mouch,

cheers Oliver

** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq


** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: