[ddots-l] Re: problem importing instruments

Thanks again for all your help. My problem is that I can't record at all.
----- Original Message ----- 
From: "Berhane Kidane" <bkw11@xxxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Friday, April 01, 2005 3:46 PM
Subject: [ddots-l] Re: problem importing instruments


> Hi Neville,
> Let's do another trial.
> First of all, your problem is you didn't hear, but you have recorded it? 
> Or
> you couldn't record it at all.
> If your problem is, you have recorded it, but you didn't hear it, close
> Sonar, and make sure that you should go to sequencer on your external
> keyboard.
> Now, open Sonar and try it.
> Bye for now,
> Berhane
>
>
> ----- Original Message ----- 
> From: "Neville Peter" <neville@xxxxxxxxxxxxxxxx>
> To: <ddots-l@xxxxxxxxxxxxx>
> Sent: Friday, April 01, 2005 12:12 PM
> Subject: [ddots-l] Re: problem importing instruments
>
>
>>I wen to the options menue. My outputs and my inputs were already
>>selected.
>> Any more segestions? thanks again for your help.
>> ----- Original Message ----- 
>> From: "Berhane Kidane" <bkw11@xxxxxxxxxxxxx>
>> To: <ddots-l@xxxxxxxxxxxxx>
>> Sent: Tuesday, March 29, 2005 12:16 PM
>> Subject: [ddots-l] Re: problem importing instruments
>>
>>
>>> Now, try this,
>>> Check the output and input ports, they have to be selected.
>>> While you are in track view, pressing Alt+O+M will take you to the midi
>>> devices where you can access all the input and output ports, and make
>>> sure
>>> that you have selected them.
>>> Bye for now,
>>> Berhane
>>> ----- Original Message ----- 
>>> From: "Neville Peter" <neville@xxxxxxxxxxxxxxxx>
>>> To: <ddots-l@xxxxxxxxxxxxx>
>>> Sent: Tuesday, March 29, 2005 11:17 AM
>>> Subject: [ddots-l] Re: problem importing instruments
>>>
>>>
>>>> All the midi cables are connected correctly. I Don't use a mixer. My
>>>> studio
>>>> moniters are connected to out puts 1 and 2 of my sound card. I can
>>>> record
>>>> my
>>>> key bord just fine when I'm on an audio track. It's only when I'm on a
>>>> midi
>>>> track I can't hear it. Thanks again for all your help.
>>>> ----- Original Message ----- 
>>>> From: "Berhane Kidane" <bkw11@xxxxxxxxxxxxx>
>>>> To: <ddots-l@xxxxxxxxxxxxx>
>>>> Sent: Monday, March 28, 2005 2:46 PM
>>>> Subject: [ddots-l] Re: problem importing instruments
>>>>
>>>>
>>>>> Let me remind you in case,
>>>>> Have you checked that the midi goes from midi in from your keyboard to
>>>>> midi
>>>>> out to the midi interface?
>>>>> Secondly, have you made the right connection of your cables from your
>>>>> keyboard to your mixer, and are you sure that you got sound of your
>>>>> keyboard
>>>>> through the mixer?
>>>>> Third, I want to know that have you recorded and you couldn't hear the
>>>>> sound, or you totally didn't record at all.
>>>>> To make sure that you have recorded or not, check by pressing
>>>>> Control+Shift+the letter R.
>>>>> This keystroke will tell you which tracks are recorded.
>>>>> Thank you,
>>>>> Berhane
>>>>> ----- Original Message ----- 
>>>>> From: "Neville Peter" <neville@xxxxxxxxxxxxxxxx>
>>>>> To: <ddots-l@xxxxxxxxxxxxx>
>>>>> Sent: Monday, March 28, 2005 2:27 PM
>>>>> Subject: [ddots-l] Re: problem importing instruments
>>>>>
>>>>>
>>>>>> As far as I can tell everything checks out.
>>>>>> ----- Original Message ----- 
>>>>>> From: "Berhane Kidane" <bkw11@xxxxxxxxxxxxx>
>>>>>> To: <ddots-l@xxxxxxxxxxxxx>
>>>>>> Sent: Monday, March 28, 2005 2:18 PM
>>>>>> Subject: [ddots-l] Re: problem importing instruments
>>>>>>
>>>>>>
>>>>>>> You know what, importing the name of your instrument and having it 
>>>>>>> in
>>>>>>> your
>>>>>>> lists doesn't mean that you have done successfully the connection of
>>>>>>> the
>>>>>>> external keyboard with the midi interface or sound card.
>>>>>>> I don't know what keyboard you have .
>>>>>>> Anyways, try to check the connection of the midi cables.
>>>>>>> Berhane
>>>>>>> ----- Original Message ----- 
>>>>>>> From: "Neville Peter" <neville@xxxxxxxxxxxxxxxx>
>>>>>>> To: <ddots-l@xxxxxxxxxxxxx>
>>>>>>> Sent: Monday, March 28, 2005 1:51 PM
>>>>>>> Subject: [ddots-l] problem importing instruments
>>>>>>>
>>>>>>>
>>>>>>>> Thanks again for the help on converting midi to audio. I have
>>>>>>>> another
>>>>>>>> question.
>>>>>>>> As I said before I was using the ederal, but now I want to import
>>>>>>>> some
>>>>>>>> of
>>>>>>>> the sounds on my controler. I believe I did it successfully because
>>>>>>>> the
>>>>>>>> name of my key bord is listed in the midi channel colome in the
>>>>>>>> track
>>>>>>>> pain.
>>>>>>>> Now when I play my key bord I don't hear anything. The only time it
>>>>>>>> works
>>>>>>>> is when I use the ederal.On my previous projects, I would play my
>>>>>>>> key
>>>>>>>> bord
>>>>>>>> as audio, but I want to play it as midi so that I can edit my
>>>>>>>> performance
>>>>>>>> in the event view. Any ideas on what's rong?
>>>>>>>> ** To leave the list, click on the immediately-following link:-
>>>>>>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>>>>>>> ** If this link doesn't work then send a message to:
>>>>>>>> ** ddots-l-request@xxxxxxxxxxxxx
>>>>>>>> ** and in the Subject line type
>>>>>>>> ** unsubscribe
>>>>>>>> ** For other list commands such as vacation mode, click on the
>>>>>>>> ** immediately-following link:-
>>>>>>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>>>>>>>> ** or send a message, to
>>>>>>>> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>>>>>>>>
>>>>>>>
>>>>>>> ** To leave the list, click on the immediately-following link:-
>>>>>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>>>>>> ** If this link doesn't work then send a message to:
>>>>>>> ** ddots-l-request@xxxxxxxxxxxxx
>>>>>>> ** and in the Subject line type
>>>>>>> ** unsubscribe
>>>>>>> ** For other list commands such as vacation mode, click on the
>>>>>>> ** immediately-following link:-
>>>>>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>>>>>>> ** or send a message, to
>>>>>>> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>> ** To leave the list, click on the immediately-following link:-
>>>>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>>>>> ** If this link doesn't work then send a message to:
>>>>>> ** ddots-l-request@xxxxxxxxxxxxx
>>>>>> ** and in the Subject line type
>>>>>> ** unsubscribe
>>>>>> ** For other list commands such as vacation mode, click on the
>>>>>> ** immediately-following link:-
>>>>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>>>>>> ** or send a message, to
>>>>>> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>>>>>>
>>>>>
>>>>> ** To leave the list, click on the immediately-following link:-
>>>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>>>> ** If this link doesn't work then send a message to:
>>>>> ** ddots-l-request@xxxxxxxxxxxxx
>>>>> ** and in the Subject line type
>>>>> ** unsubscribe
>>>>> ** For other list commands such as vacation mode, click on the
>>>>> ** immediately-following link:-
>>>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>>>>> ** or send a message, to
>>>>> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>>>>>
>>>>>
>>>>
>>>>
>>>> ** To leave the list, click on the immediately-following link:-
>>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>>> ** If this link doesn't work then send a message to:
>>>> ** ddots-l-request@xxxxxxxxxxxxx
>>>> ** and in the Subject line type
>>>> ** unsubscribe
>>>> ** For other list commands such as vacation mode, click on the
>>>> ** immediately-following link:-
>>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>>>> ** or send a message, to
>>>> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>>>>
>>>>
>>>
>>> ** To leave the list, click on the immediately-following link:-
>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>> ** If this link doesn't work then send a message to:
>>> ** ddots-l-request@xxxxxxxxxxxxx
>>> ** and in the Subject line type
>>> ** unsubscribe
>>> ** For other list commands such as vacation mode, click on the
>>> ** immediately-following link:-
>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>>> ** or send a message, to
>>> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>>>
>>>
>>
>>
>> ** To leave the list, click on the immediately-following link:-
>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** ddots-l-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click on the
>> ** immediately-following link:-
>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to
>> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>>
>>
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>
> 


** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to 
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: