[ddots-l] Re: problem importing instruments

Hi Neville,
Let's do another trial.
First of all, your problem is you didn't hear, but you have recorded it? Or 
you couldn't record it at all.
If your problem is, you have recorded it, but you didn't hear it, close 
Sonar, and make sure that you should go to sequencer on your external 
keyboard.
Now, open Sonar and try it.
Bye for now,
Berhane


----- Original Message ----- 
From: "Neville Peter" <neville@xxxxxxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Friday, April 01, 2005 12:12 PM
Subject: [ddots-l] Re: problem importing instruments


>I wen to the options menue. My outputs and my inputs were already 
>selected.
> Any more segestions? thanks again for your help.
> ----- Original Message ----- 
> From: "Berhane Kidane" <bkw11@xxxxxxxxxxxxx>
> To: <ddots-l@xxxxxxxxxxxxx>
> Sent: Tuesday, March 29, 2005 12:16 PM
> Subject: [ddots-l] Re: problem importing instruments
>
>
>> Now, try this,
>> Check the output and input ports, they have to be selected.
>> While you are in track view, pressing Alt+O+M will take you to the midi
>> devices where you can access all the input and output ports, and make 
>> sure
>> that you have selected them.
>> Bye for now,
>> Berhane
>> ----- Original Message ----- 
>> From: "Neville Peter" <neville@xxxxxxxxxxxxxxxx>
>> To: <ddots-l@xxxxxxxxxxxxx>
>> Sent: Tuesday, March 29, 2005 11:17 AM
>> Subject: [ddots-l] Re: problem importing instruments
>>
>>
>>> All the midi cables are connected correctly. I Don't use a mixer. My
>>> studio
>>> moniters are connected to out puts 1 and 2 of my sound card. I can 
>>> record
>>> my
>>> key bord just fine when I'm on an audio track. It's only when I'm on a
>>> midi
>>> track I can't hear it. Thanks again for all your help.
>>> ----- Original Message ----- 
>>> From: "Berhane Kidane" <bkw11@xxxxxxxxxxxxx>
>>> To: <ddots-l@xxxxxxxxxxxxx>
>>> Sent: Monday, March 28, 2005 2:46 PM
>>> Subject: [ddots-l] Re: problem importing instruments
>>>
>>>
>>>> Let me remind you in case,
>>>> Have you checked that the midi goes from midi in from your keyboard to
>>>> midi
>>>> out to the midi interface?
>>>> Secondly, have you made the right connection of your cables from your
>>>> keyboard to your mixer, and are you sure that you got sound of your
>>>> keyboard
>>>> through the mixer?
>>>> Third, I want to know that have you recorded and you couldn't hear the
>>>> sound, or you totally didn't record at all.
>>>> To make sure that you have recorded or not, check by pressing
>>>> Control+Shift+the letter R.
>>>> This keystroke will tell you which tracks are recorded.
>>>> Thank you,
>>>> Berhane
>>>> ----- Original Message ----- 
>>>> From: "Neville Peter" <neville@xxxxxxxxxxxxxxxx>
>>>> To: <ddots-l@xxxxxxxxxxxxx>
>>>> Sent: Monday, March 28, 2005 2:27 PM
>>>> Subject: [ddots-l] Re: problem importing instruments
>>>>
>>>>
>>>>> As far as I can tell everything checks out.
>>>>> ----- Original Message ----- 
>>>>> From: "Berhane Kidane" <bkw11@xxxxxxxxxxxxx>
>>>>> To: <ddots-l@xxxxxxxxxxxxx>
>>>>> Sent: Monday, March 28, 2005 2:18 PM
>>>>> Subject: [ddots-l] Re: problem importing instruments
>>>>>
>>>>>
>>>>>> You know what, importing the name of your instrument and having it in
>>>>>> your
>>>>>> lists doesn't mean that you have done successfully the connection of
>>>>>> the
>>>>>> external keyboard with the midi interface or sound card.
>>>>>> I don't know what keyboard you have .
>>>>>> Anyways, try to check the connection of the midi cables.
>>>>>> Berhane
>>>>>> ----- Original Message ----- 
>>>>>> From: "Neville Peter" <neville@xxxxxxxxxxxxxxxx>
>>>>>> To: <ddots-l@xxxxxxxxxxxxx>
>>>>>> Sent: Monday, March 28, 2005 1:51 PM
>>>>>> Subject: [ddots-l] problem importing instruments
>>>>>>
>>>>>>
>>>>>>> Thanks again for the help on converting midi to audio. I have 
>>>>>>> another
>>>>>>> question.
>>>>>>> As I said before I was using the ederal, but now I want to import
>>>>>>> some
>>>>>>> of
>>>>>>> the sounds on my controler. I believe I did it successfully because
>>>>>>> the
>>>>>>> name of my key bord is listed in the midi channel colome in the 
>>>>>>> track
>>>>>>> pain.
>>>>>>> Now when I play my key bord I don't hear anything. The only time it
>>>>>>> works
>>>>>>> is when I use the ederal.On my previous projects, I would play my 
>>>>>>> key
>>>>>>> bord
>>>>>>> as audio, but I want to play it as midi so that I can edit my
>>>>>>> performance
>>>>>>> in the event view. Any ideas on what's rong?
>>>>>>> ** To leave the list, click on the immediately-following link:-
>>>>>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>>>>>> ** If this link doesn't work then send a message to:
>>>>>>> ** ddots-l-request@xxxxxxxxxxxxx
>>>>>>> ** and in the Subject line type
>>>>>>> ** unsubscribe
>>>>>>> ** For other list commands such as vacation mode, click on the
>>>>>>> ** immediately-following link:-
>>>>>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>>>>>>> ** or send a message, to
>>>>>>> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>>>>>>>
>>>>>>
>>>>>> ** To leave the list, click on the immediately-following link:-
>>>>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>>>>> ** If this link doesn't work then send a message to:
>>>>>> ** ddots-l-request@xxxxxxxxxxxxx
>>>>>> ** and in the Subject line type
>>>>>> ** unsubscribe
>>>>>> ** For other list commands such as vacation mode, click on the
>>>>>> ** immediately-following link:-
>>>>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>>>>>> ** or send a message, to
>>>>>> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>> ** To leave the list, click on the immediately-following link:-
>>>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>>>> ** If this link doesn't work then send a message to:
>>>>> ** ddots-l-request@xxxxxxxxxxxxx
>>>>> ** and in the Subject line type
>>>>> ** unsubscribe
>>>>> ** For other list commands such as vacation mode, click on the
>>>>> ** immediately-following link:-
>>>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>>>>> ** or send a message, to
>>>>> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>>>>>
>>>>
>>>> ** To leave the list, click on the immediately-following link:-
>>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>>> ** If this link doesn't work then send a message to:
>>>> ** ddots-l-request@xxxxxxxxxxxxx
>>>> ** and in the Subject line type
>>>> ** unsubscribe
>>>> ** For other list commands such as vacation mode, click on the
>>>> ** immediately-following link:-
>>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>>>> ** or send a message, to
>>>> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>>>>
>>>>
>>>
>>>
>>> ** To leave the list, click on the immediately-following link:-
>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>> ** If this link doesn't work then send a message to:
>>> ** ddots-l-request@xxxxxxxxxxxxx
>>> ** and in the Subject line type
>>> ** unsubscribe
>>> ** For other list commands such as vacation mode, click on the
>>> ** immediately-following link:-
>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>>> ** or send a message, to
>>> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>>>
>>>
>>
>> ** To leave the list, click on the immediately-following link:-
>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** ddots-l-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click on the
>> ** immediately-following link:-
>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to
>> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>>
>>
>
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>
> 

** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to 
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: