[ddots-l] Re: motu sound card

Thanks. 


Best wishes.

Tim Burgess
Raised Bar Ltd
Phone:  +44 (0)1827 719822

Don't forget to vote for improved access to music and music technology at

http://www.raisedbar.net/petition.htm
 
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Mike C
Sent: 27 March 2008 23:00
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: motu sound card

Hey Tim it is indeed the select knob on the unit, sorry for not making
myself clear.

----- Original Message -----
From: "Tim Burgess" <tim@xxxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Thursday, March 27, 2008 8:43 AM
Subject: [ddots-l] Re: motu sound card


> Hi,
>
> I assume that's the select knob on the physical unit (I don't remember a
> virtual knob within CueMix).
>
> Best wishes.
>
> Tim Burgess
> Raised Bar Ltd
> Phone:  +44 (0)1827 719822
>
> Don't forget to vote for improved access to music and music technology at
>
> http://www.raisedbar.net/petition.htm
>
> -----Original Message-----
> From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] 
> On
> Behalf Of Mike C
> Sent: 27 March 2008 10:31
> To: ddots-l@xxxxxxxxxxxxx
> Subject: [ddots-l] Re: motu sound card
>
> Hey Tim, so far things are working fine with your scripts, I remained them
> to the appropriate sound card, and I can gain access to the pan pots, and
> enable the inputs with no problems.
> by the way I found out how you can control the main out volume, you 
> simplay
> have to press the select knob two times, to cycle to this setting and 
> there
> you have it you can control the output volume.
> I have my first vocal session to night, cross my fingers and hope this is
> going to work.----- Original Message -----
> From: "Tim Burgess" <tim@xxxxxxxxxxxxx>
> To: <ddots-l@xxxxxxxxxxxxx>
> Sent: Wednesday, March 26, 2008 5:17 AM
> Subject: [ddots-l] Re: motu sound card
>
>
>> Hi,
>>
>> It's a combination of Jaws script and HSC and may need some tweaking
>> for your interface, as it was written for my own PCI version.  Go to:
>>
>> http://www.raisedbar.net/articles.htm
>>
>> I'll help modify if we can get in touch with each other.
>>
>> Best wishes.
>>
>> Tim Burgess
>> Raised Bar Ltd
>> Phone:  +44 (0)1827 719822
>>
>> Don't forget to vote for improved access to music and music technology
>> at
>>
>> http://www.raisedbar.net/petition.htm
>>
>> -----Original Message-----
>> From: ddots-l-bounce@xxxxxxxxxxxxx
>> [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
>> On
>> Behalf Of Mike C
>> Sent: 26 March 2008 02:47
>> To: ddots-l@xxxxxxxxxxxxx
>> Subject: [ddots-l] Re: motu sound card
>>
>> Hi Tim once again thanks a whole bunch.  Despite the learning curve, I
>> recorded yesterday with this card, and love the sound that it produces.
>> Even with my guitar pluged in to one of the pre amps, the guitar's
>> sound isn't lost like with all other audio cards.
>> You said that you had some HSC files, I'd love to get a hold of them
>> to see what kind of graphics I can see.
>> At any rate take care.
>>
>> ----- Original Message -----
>> From: "Tim Burgess" <tim@xxxxxxxxxxxxx>
>> To: <ddots-l@xxxxxxxxxxxxx>
>> Sent: Tuesday, March 25, 2008 9:20 AM
>> Subject: [ddots-l] Re: motu sound card
>>
>>
>>> Hi,
>>>
>>> I think you'll find the output level settings in the Audio Console,
>>> not within CueMix.
>>>
>>> Best wishes.
>>>
>>> Tim Burgess
>>> Raised Bar Ltd
>>> Phone:  +44 (0)1827 719822
>>>
>>> Don't forget to vote for improved access to music and music
>>> technology at
>>>
>>> http://www.raisedbar.net/petition.htm
>>>
>>> -----Original Message-----
>>> From: ddots-l-bounce@xxxxxxxxxxxxx
>>> [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
>>> On
>>> Behalf Of Gordon Kent
>>> Sent: 24 March 2008 21:23
>>> To: ddots-l@xxxxxxxxxxxxx
>>> Subject: [ddots-l] Re: motu sound card
>>>
>>> Mike:
>>> I never have even tried to bother with the cue mix console.  Since
>>> you have a newer version of the motu than I have and they have made
>>> some changes, I couldn't tell you how to raise the output.  I think
>>> it may be set to -10db but I'm not sure about that.
>>> Gord
>>>
>>> ----- Original Message -----
>>> From: Mike C <mailto:m_dsmusic@xxxxxxxxxxxx>
>>> To: ddots-l@xxxxxxxxxxxxxxxx
>>> Sent: Sunday, March 23, 2008 7:59 AM
>>> Subject: [ddots-l] motu sound card
>>>
>>> Hey Gord or any one on list, I just purchased the Motu 8pre, and love
>>> the card sound so far.  My only concern is on how to get around the Q
>>> mixing console, do I need to use the Jaws cursor?
>>> and how can I efectivly lower or raise the main out volume?
>>> Any help regarding this would be greatly appreciated.
>>>
>>>
>>>
>>>
>>> PLEASE READ THIS FOOTER AT LEAST ONCE!
>>> To leave the list, click on the immediately following link:
>>> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
>>> If this link doesn't work then send a message to:
>>> ddots-l-request@xxxxxxxxxxxxx
>>> and in the Subject line type
>>> unsubscribe
>>> For other list commands such as vacation mode, click on the
>>> immediately following link:
>>> ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
>>> ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
>>>
>>
>> PLEASE READ THIS FOOTER AT LEAST ONCE!
>> To leave the list, click on the immediately following link:
>> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
>> If this link doesn't work then send a message to:
>> ddots-l-request@xxxxxxxxxxxxx
>> and in the Subject line type
>> unsubscribe
>> For other list commands such as vacation mode, click on the
>> immediately following link:
>> ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
>> ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
>>
>>
>> PLEASE READ THIS FOOTER AT LEAST ONCE!
>> To leave the list, click on the immediately following link:
>> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
>> If this link doesn't work then send a message to:
>> ddots-l-request@xxxxxxxxxxxxx
>> and in the Subject line type
>> unsubscribe
>> For other list commands such as vacation mode, click on the
>> immediately following link:
>> ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
>> ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
>>
>
> PLEASE READ THIS FOOTER AT LEAST ONCE!
> To leave the list, click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
> If this link doesn't work then send a message to:
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> unsubscribe
> For other list commands such as vacation mode, click on the immediately
> following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
> ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
>
>
> PLEASE READ THIS FOOTER AT LEAST ONCE!
> To leave the list, click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
> If this link doesn't work then send a message to:
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> unsubscribe
> For other list commands such as vacation mode,
> click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=faq or
> send a message, to
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> faq
>
> 

PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, 
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to 
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq


PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, 
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to 
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq

Other related posts: