[ddots-l] Re: metrenome problem

Hi Brian,
You have to enable the Midi note checked.
To do this,
Press alt+O for option, P for project.
Press Control+Tab until you hear Metronom page.
In that page, tab several times until you get (use midi note unchecked), and
press the space bar to check that check box.
That is it.
Now, you start to hear the metronom properly.
Regards,
Berhane
----- Original Message ----- 
From: "Brian Kijewski" <sitedblind@xxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Wednesday, March 30, 2005 8:03 PM
Subject: [ddots-l] metrenome problem


> Hello everyone:
> I have finally gotten around to getting the midi working in Sonar 2.2. The
> only problem I'm still facing is that the metrenome is not working
> correctly. It comes through the PC speakers fine (but that is too quiet
> and
> not very useful), but will not come through my delta sound card and into
> my
> stereo speakers where everything else comes out. I have made sure that
> channel 10 is assigned to the drums, turned the recording click on, but
> when
> I press R for record, there is know sound from the metrenome. All the midi
> is coming through my sound card perfectly, but I am unable to get the
> metrenome working. Any ideas of what may be going on and how I may be able
> to fix it?
> Also, in Sonar sometimes the little noises (when you arm a track, for
> example) do not work. It is as if the sound card sometimes has troubles
> playing those sounds along with the audio at the same time.
>
> Brian Kijewski
>
> Check out my band's music at:
>
> http://www.soundclick.com/cosmicrepercussions
>
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>
>

** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to 
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: