Is there a way to do this without using a laptop or sonar? Are there any devices that will let me do this without a laptop? On 10/10/09, Steve Wicketts <steve.wicketts@xxxxxxxxxxxxxxxx> wrote: > Hi Omar, > > This may not be of any help what so ever. I can explain how to do it old > School style. > I do apologise if I'm stating the obvious. > > You will need a mixer with at least 3 sets of stereo bus channels, bus > channel 3 being your stereo master bus channel. > > A: assign the microphone signal and all instrument signals to stereo bus > channel 3 plus all the necessary effects for your front of house mix. > > B: Assign all instruments except vocal microphone to stereo bus channel 2, > these may be wet or dry depending on how you wish to record. > > c: assign vocal Microphone to stereo bus channel 1, again, this may be wet > or dry. > > Now take the cables from Stereo busses 1 and 2, connect them to Channels > 1-2-3-4 on the recording system: if you are recording to Sonar, you will > need a sound card or mixer with at least four mono inputs. > > Not yet used to thinking virtual and there's possibly now better ways of > recording live performances. > > Hope this has been of some help. > > Steve W > > ----- Original Message ----- > From: Omar Binno > To: ddots-l@xxxxxxxxxxxxx > Sent: Saturday, October 10, 2009 9:07 PM > Subject: [ddots-l] live performance recording > > > Hello, > > How would my setup need to run during a live gig if I want to record the > vocals from live performances separate from the music? > > Thanks. > > > Omar Binno > > Website: www.omarbinno.com > AIM: LOD1116 > Skype: obinno1 PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq