[ddots-l] Re: k1000 and Goodfeel in conflict

Hi, Bill,

Although I do not use my laptop much, I do want it for Kurzweil when I am 
traveling especially. I am not going to put Goodfeel on my desktop at all.

Evelyn

At 01:19 PM 1/17/05 -0500, you wrote:
>Hi, Evelyn,
>
>As I recall, you own both an HP and a Canon CanoScan or equivalent USB
>scanner.  I recommend that you dedicate the Canon to scanning music with
>SharpEye and keep that HP for scanning text from Kurzweil.  If you only
>owned one scanner, that HP, we could find a way to configure it to work with
>both programs.  But, since you do own 2 scanners and since we know that HP's
>interface and SharpEye do not work optimally, I suggest you just keep them
>separate unless there is some reason not to do so.  We do have many
>customers who use SharpEye with an HP scanner but, for some strange reason,
>HP's scanning software (I believe it's called Precision Scan) will not
>remember required settings for SharpEye from session to session.  In other
>words, one must check the HP Precision Scan settings each time one launches
>SharpEye.
>
>Regards,
>Bill
>
>P.S.  Don't forget that you must set up your scanner using the Select Twain
>Source under SharpEye's File menu.
>
>
>-----Original Message-----
>From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
>Behalf Of W. Nick Dotson
>Sent: Monday, January 17, 2005 7:04 AM
>To: ddots-l@xxxxxxxxxxxxx
>Subject: [ddots-l] Re: k1000 and Goodfeel in conflict
>
>You're somehow sending the image to the "kesi virtual printer".  Try
>changing the port to the printer to "dummy".  See if that helps.  I'm not at
>all sure why
>the printer is being called up when you print to SharpEye, unless, the
>printer default for your system is fixated on "kesi virtual printer", or,
>That's the printer
>SharpEye has settled on.
>
>W. Nick Dotson
>
>On Mon, 17 Jan 2005 00:17:38 -0500, Evelyn Weckerly wrote:
>
>Nick,
>
>I don't have K1000 running. It just starts and grabs the image. I think I
>may call you tomorrow.
>
>Evelyn
>
>At 08:59 PM 1/16/05 -0600, you wrote:
> >First, don't have Kurzweil 1000 on when you run "sharp Eye?
>
> >Next, what's the scanner and manufacturer?  What's the "scanner
> >Source"?  (alt-t s alt-s)  What driver is selected, what manufacturer and
> >model of
> >scanner?  Finally what's "hold scanner" set to?
>
> >W. Nick Dotson
>
>
>
>
> >On Sun, 16 Jan 2005 18:07:39 -0500, Evelyn Weckerly wrote:
>
> >Hi to both lists,
>
> >Yesterday I tried to run Goodfeel on a laptop Windows XP home machine that
> >also has k1000 version 9.2 on it. Every time we tried to start Sharp Eye,
> >Kurzweil would try to grab the image and would start to chatter, but Sharp
> >Eye was frozaen on the image. Anyone on either list who has a similar
> >set-up, I would appreciate some contact with. Thanks.
>
> >Evelyn
>
>
>
> >** To leave the list, click on the immediately-following link:-
> >** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> >** If this link doesn't work then send a message to:
> >** ddots-l-request@xxxxxxxxxxxxx
> >** and in the Subject line type
> >** unsubscribe
> >** For other list commands such as vacation mode, click on the
> >** immediately-following link:-
> >** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> >** or send a message, to
> >** ddots-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
>
>
> >W. Nick Dotson
> >Technical Support Group
> >Senior Support Engineer for Kurzweil 1000
>
>
> >** To leave the list, click on the immediately-following link:-
> >** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> >** If this link doesn't work then send a message to:
> >** ddots-l-request@xxxxxxxxxxxxx
> >** and in the Subject line type
> >** unsubscribe
> >** For other list commands such as vacation mode, click on the
> >** immediately-following link:-
> >** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> >** or send a message, to
> >** ddots-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
>** To leave the list, click on the immediately-following link:-
>** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>** If this link doesn't work then send a message to:
>** ddots-l-request@xxxxxxxxxxxxx
>** and in the Subject line type
>** unsubscribe
>** For other list commands such as vacation mode, click on the
>** immediately-following link:-
>** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>** or send a message, to
>** ddots-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
>
>
>
>** To leave the list, click on the immediately-following link:-
>** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>** If this link doesn't work then send a message to:
>** ddots-l-request@xxxxxxxxxxxxx
>** and in the Subject line type
>** unsubscribe
>** For other list commands such as vacation mode, click on the
>** immediately-following link:-
>** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>** or send a message, to
>** ddots-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
>
>** To leave the list, click on the immediately-following link:-
>** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>** If this link doesn't work then send a message to:
>** ddots-l-request@xxxxxxxxxxxxx
>** and in the Subject line type
>** unsubscribe
>** For other list commands such as vacation mode, click on the
>** immediately-following link:-
>** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>** or send a message, to
>** ddots-request@xxxxxxxxxxxxx with the Subject:- faq


** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to 
** ddots-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: