[ddots-l] Re: k1000 and Goodfeel in conflict

You're somehow sending the image to the "kesi virtual printer".  Try changing 
the port to the printer to "dummy".  See if that helps.  I'm not at all sure 
why 
the printer is being called up when you print to SharpEye, unless, the printer 
default for your system is fixated on "kesi virtual printer", or, That's the 
printer 
SharpEye has settled on.

W. Nick Dotson

On Mon, 17 Jan 2005 00:17:38 -0500, Evelyn Weckerly wrote:

Nick,

I don't have K1000 running. It just starts and grabs the image. I think I 
may call you tomorrow.

Evelyn

At 08:59 PM 1/16/05 -0600, you wrote:
>First, don't have Kurzweil 1000 on when you run "sharp Eye?

>Next, what's the scanner and manufacturer?  What's the "scanner 
>Source"?  (alt-t s alt-s)  What driver is selected, what manufacturer and 
>model of
>scanner?  Finally what's "hold scanner" set to?

>W. Nick Dotson




>On Sun, 16 Jan 2005 18:07:39 -0500, Evelyn Weckerly wrote:

>Hi to both lists,

>Yesterday I tried to run Goodfeel on a laptop Windows XP home machine that
>also has k1000 version 9.2 on it. Every time we tried to start Sharp Eye,
>Kurzweil would try to grab the image and would start to chatter, but Sharp
>Eye was frozaen on the image. Anyone on either list who has a similar
>set-up, I would appreciate some contact with. Thanks.

>Evelyn



>** To leave the list, click on the immediately-following link:-
>** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>** If this link doesn't work then send a message to:
>** ddots-l-request@xxxxxxxxxxxxx
>** and in the Subject line type
>** unsubscribe
>** For other list commands such as vacation mode, click on the
>** immediately-following link:-
>** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>** or send a message, to
>** ddots-request@xxxxxxxxxxxxx with the Subject:- faq




>W. Nick Dotson
>Technical Support Group
>Senior Support Engineer for Kurzweil 1000


>** To leave the list, click on the immediately-following link:-
>** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>** If this link doesn't work then send a message to:
>** ddots-l-request@xxxxxxxxxxxxx
>** and in the Subject line type
>** unsubscribe
>** For other list commands such as vacation mode, click on the
>** immediately-following link:-
>** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>** or send a message, to
>** ddots-request@xxxxxxxxxxxxx with the Subject:- faq


** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to 
** ddots-request@xxxxxxxxxxxxx with the Subject:- faq





** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to 
** ddots-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: