[ddots-l] Re: k1000 and Goodfeel in conflict


-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
On Behalf Of Evelyn Weckerly
Sent: Sunday, January 16, 2005 9:46 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: k1000 and Goodfeel in conflict
Maybe, if you initiate the scan rprocess for Sharp Eye from the PC
keyboard instead of the scanner, if that's possible, you'll have better
luck.  
kevin

Hi, Dave,

Actually, I am not sure what happened because a friend started the
scanner. 
However, I was following directions for blind users at the time. We may 
have gotten into the trouble at that point though. I have been used to 
k1000 controlling the scanner. Anyway, one thing I am going to have to
do 
tomorrow is (Nick, take note) to read the scanner's manual. Nick is
always 
urging people on the Kurzweil list to read the manual, and rightly so.

Evelyn

At 09:27 PM 1/16/05 -0800, you wrote:
>Evelyn,
>
>Are you by chance launching the scan process by pressing one of the 
>buttons on the scanner itself? I have 5 buttons on my scanner and each 
>is configured to launch a particular program.
>
>Dave
>
>----- Original Message -----
>From: "Evelyn Weckerly" <weckerly@xxxxxxx>
>To: <ddots-l@xxxxxxxxxxxxx>
>Sent: Sunday, January 16, 2005 9:21 PM
>Subject: [ddots-l] Re: k1000 and Goodfeel in conflict
>
>
>Hi, Gordon,
>
>Kurzweil was already on the machine when I installed a trial version of

>Goodfeel with a 30-day license from Dancing Dots. The installation and 
>license authorization went fine. The trouble started when we attempted 
>to scan in some music.
>
>Evelyn
>
>At 10:35 PM 1/16/05 -0500, you wrote:
> >evelyn:
> >That is odd.  I have the kurzwiel software and sharpeye running on my
>wife's
> >laptop  and they get along nicely.
> >Did you install the kurzwiel software after installing sharpeye?  
> >Maybe you should try reinstalling sharpeye if that is the case. Gord
> >----- Original Message -----
> >From: "Evelyn Weckerly" <weckerly@xxxxxxx>
> >To: <k1000@xxxxxxxxxxxxxxxxxxxxx>; <ddots-l@xxxxxxxxxxxxx>
> >Sent: Sunday, January 16, 2005 6:07 PM
> >Subject: [ddots-l] k1000 and Goodfeel in conflict
> >
> >
> >Hi to both lists,
> >
> >Yesterday I tried to run Goodfeel on a laptop Windows XP home machine

> >that also has k1000 version 9.2 on it. Every time we tried to start 
> >Sharp Eye, Kurzweil would try to grab the image and would start to 
> >chatter, but Sharp Eye was frozaen on the image. Anyone on either 
> >list who has a similar set-up, I would appreciate some contact with. 
> >Thanks.
> >
> >Evelyn
> >
> >
> >
> >** To leave the list, click on the immediately-following link:-
> >** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> >** If this link doesn't work then send a message to:
> >** ddots-l-request@xxxxxxxxxxxxx
> >** and in the Subject line type
> >** unsubscribe
> >** For other list commands such as vacation mode, click on the
> >** immediately-following link:-
> >** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> >** or send a message, to
> >** ddots-request@xxxxxxxxxxxxx with the Subject:- faq
> >
> >
> >** To leave the list, click on the immediately-following link:-
> >** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> >** If this link doesn't work then send a message to:
> >** ddots-l-request@xxxxxxxxxxxxx
> >** and in the Subject line type
> >** unsubscribe
> >** For other list commands such as vacation mode, click on the
> >** immediately-following link:-
> >** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> >** or send a message, to
> >** ddots-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
>** To leave the list, click on the immediately-following link:-
>** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>** If this link doesn't work then send a message to:
>** ddots-l-request@xxxxxxxxxxxxx
>** and in the Subject line type
>** unsubscribe
>** For other list commands such as vacation mode, click on the
>** immediately-following link:-
>** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>** or send a message, to
>** ddots-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
>
>** To leave the list, click on the immediately-following link:-
>** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>** If this link doesn't work then send a message to:
>** ddots-l-request@xxxxxxxxxxxxx
>** and in the Subject line type
>** unsubscribe
>** For other list commands such as vacation mode, click on the
>** immediately-following link:-
>** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>** or send a message, to
>** ddots-request@xxxxxxxxxxxxx with the Subject:- faq


** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to 
** ddots-request@xxxxxxxxxxxxx with the Subject:- faq

** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to 
** ddots-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: