[ddots-l] Re: ideal peak levels help
- From: "G. McFarlane" <gmcf@xxxxxxxxxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Mon, 27 Jul 2009 06:36:47 +0100
Thanks Darren
This is useful advice.
Gordon
----- Original Message -----
From: Darren H
To: ddots-l@xxxxxxxxxxxxx
Sent: Monday, July 27, 2009 4:56 AM
Subject: [ddots-l] Re: ideal peak levels help
Hi.
gordon, my starting point is to mix the vocals with the drum track.
The snare should just about be cutting through the vocals, but without
pushing them back.
On a similar note, when mixing the bass, especially bass guitar with drums, I
like to mix them so that the kick and the bass notes when they are playing
together sound like one instrument.
cheers
Darren
----- Original Message -----
From: G. McFarlane
To: ddots-l@xxxxxxxxxxxxx
Sent: Monday, July 27, 2009 4:17 AM
Subject: [ddots-l] Re: ideal peak levels help
Hi
On the same subject, is there a general rule of thumb as to the balance
between vocals (individual voice) and background music/instruments?
Gordon McFarlane
----- Original Message -----
From: Omar Binno
To: ddots-l@xxxxxxxxxxxxx
Sent: Monday, July 27, 2009 12:12 AM
Subject: [ddots-l] Re: ideal peak levels help
No track's level should transcend -0.1. After knowing that, it pretty
much depends on how you want your stuff mixed, and how you want each track to
sound in conjunction with the other tracks.
Omar Binno
Website: www.omarbinno.com
AIM: LOD1116
Skype: obinno1
----- Original Message -----
From: Mark Dew
To: ddots-l@xxxxxxxxxxxxx
Sent: Sunday, July 26, 2009 7:09 PM
Subject: [ddots-l] ideal peak levels help
Hello group, about peak levels.
Pressing the f2 key shows the peak level.
Normally, what would be the ideal peek level for a track?
I realize there would be a different peak level for each track in a
song.
What peak level would be considered too high?
Also, lets say you have 4 tracks drums, bass guitar and piano.
A rough peak level for each track
would be what?
Thanks in advance.
Mark from St. Louis Mo.
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
Other related posts: