[ddots-l] Re: enable sonar jaws surface

  • From: D!J!X! <megamansuperior@xxxxxxxxxxx>
  • To: <ddots-l@xxxxxxxxxxxxx>
  • Date: Fri, 15 Jun 2012 14:42:43 -0400

Actually, you were right there; the m-audio site itself has it... :)
If not google m-audio oxygen61 manual.
 
HTH, D!J!X!

 
  _____  

From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Johan Piryns
Sent: Friday, June 15, 2012 5:16 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: enable sonar jaws surface


Hi,
 
this is a great and better description than the descriptions on the oxygen
site itself smile.
where can I find the manual?
 
regards
Johan

  _____  

Van: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
Namens D!J!X!
Verzonden: vrijdag 15 juni 2012 6:58
Aan: ddots-l@xxxxxxxxxxxxx
Onderwerp: [ddots-l] Re: enable sonar jaws surface


Hi Rui, I was looking for the messsage I had sent a while back with the
description of it but can't find it; the oxygen is very easy to configure;
it doesn't even use a display!
 
It has: 61 touch sensitive keys (with programmable velocity)
Pitch bend wheel, modulation wheel, octave shift up and down buttons (for
shifting the entire keyboard), transpose button (for shifting the keyboard
in semitones), it has 9 sliders, 8 nobs, 9 push buttons, and 6 mmc (play,
stop, pause, rewind, fast-forward, record etc). All those buttons except
transpose/octave shift are assignable to whatever. You can assign to midi
cc, rpn, nrpn, bank/program change or toggle messages. The best part is that
to program it you use the keys on the keyboard itself, to enter numbers and
select values, no having to scroll or do any of that!
The oxygen can save upto 10 presets for easy recall, and if you have reason,
it comes configured to work with it out of the box; reason6 can even update
the reason preset and make it work with the new stuff on its own!
 
If you don't like programming or don't want to deal with it, you can just
use the basic preset and use sonar's midi learn function or your soft
synth's midi learn to assign any slider or nob to the oxygen's nobs or
sliders, you can even use the push button to toggle things on screen, send
bank and patch changes, increase programs by one or decrease by one etc.

Also, since it has a midi out port and can be externally powered, you can
use it to controll another keyboard, sequencer, a rack sound module etc. I
used it in combination with my motif; i like the fact that it has 2 buttons
that let you move the ouput channel up and down, so you can have the oxygen
send out midi on just 1 of the 16 channels;  good for multitrack situations,
or when you have something like the motif which has different sounds on each
track/channel, all you do is move the oxygen's output to the desired
channel, and start playing the new sound!
 
The manual is also easy to read and understand; I was able to get up and
running just by reading the manual and poking around with it; that's good
accessibility in my opinion.
 
HTH, D!J!X!
 
  _____  

From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Rui Vilarinho
Sent: Thursday, June 14, 2012 7:32 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: enable sonar jaws surface


Yeah, exist a bunch of equipment around!
I only   mention the Oxigen midi controler because it's obvious that exist
some  nowhow between blind users.
 
Regarding the one you refer, i dont have an opinian, try to no more about
how accessible it is.
 
 
regards,
Rui Vilarinho


----- Original Message ----- 
From: Johan  <mailto:johan.piryns@xxxxxxxxx> Piryns 
To: ddots-l@xxxxxxxxxxxxx 
Sent: Thursday, June 14, 2012 11:55 PM
Subject: [ddots-l] Re: enable sonar jaws surface

hi Rui,
 
the cakewalk A800pro r is one of them.
but I go to look.
By the cakewalk 800 there are much more knobs to use.
 
regards
Johan

  _____  

Van: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
Namens Rui Vilarinho
Verzonden: donderdag 14 juni 2012 9:04
Aan: ddots-l@xxxxxxxxxxxxx
Onderwerp: [ddots-l] Re: enable sonar jaws surface


Hi Johan,
 
Folowing DancingDots recommendations you just need to instal the Patches
8.5.2 plus 8.5.3.
 
Regarding midi keybords; exist several to choose, it all depends of how much
you will want to pay!
 
The one I use, is a midi arranger, the Roland EXR 5S.
 
However, if you dont want a midi keybord with  speackers or a expensive
synthesizer, use midi keybord  controlers that have knobs, modulations keys,
a bunge of possibilitys to be use with in a DAW.
Some in this list use the  Oxigen midi controler per example.
 
regards,
Rui Vilarinho


----- Original Message ----- 
From: Johan  <mailto:johan.piryns@xxxxxxxxx> Piryns 
To: ddots-l@xxxxxxxxxxxxx 
Sent: Thursday, June 14, 2012 12:32 AM
Subject: [ddots-l] Re: enable sonar jaws surface


I have forgotten installed patch 8.5.1.
There should be another problem:
the midi-keyboard for using.
In belgium, there is a blind musicproducer who says that we need the yamaha
motif e-8 unit.
 
regards
Johan

  _____  

Van: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
Namens Mike Christer
Verzonden: woensdag 13 juni 2012 21:26
Aan: ddots-l@xxxxxxxxxxxxx
Onderwerp: [ddots-l] Re: enable sonar jaws surface


Are you sure you installed it correctly?
 
l8r
 
 

----- Original Message ----- 
From: Johan  <mailto:johan.piryns@xxxxxxxxx> Piryns 
To: ddots-l@xxxxxxxxxxxxx 
Sent: Wednesday, June 13, 2012 8:20 PM
Subject: [ddots-l] Re: enable sonar jaws surface


Hi,
 
I have installed the first installation in my life.
this is new for me.
 
regards
Johan

  _____  

Van: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
Namens Mike Christer
Verzonden: woensdag 13 juni 2012 21:12
Aan: ddots-l@xxxxxxxxxxxxx
Onderwerp: [ddots-l] Re: enable sonar jaws surface


Try reinstalling CT, if that's what you're using?  
 
l8r
 
 

----- Original Message ----- 
From: Johan Piryns <mailto:johan.piryns@xxxxxxxxx>  
To: ddots-l@xxxxxxxxxxxxx 
Sent: Wednesday, June 13, 2012 8:10 PM
Subject: [ddots-l] enable sonar jaws surface


Hi,
 
I have a problem:
when you are in sonar, you must first push control and f12 for doing
enable contral jaws surface.
 
I do it but he said:
unable to do this process.
i don't understand what the problem is.
 
is there a reason that it don't proceed?
 
Groeten,
Johan
 
Johan Piryns
Pianist/muzikant
Meer info: johan.piryns@xxxxxxxxx
 

Other related posts: