[ddots-l] Re: drivers question

Yes! I think its because you've got the same soundcard running for
jaws/windows sounds and sonar. If you have two sound cards, use the lesser
of the two for jaws, I.E. the default soundcard, and everything should be
fine. Otherwise you could try looking at whether your sound card has more
than one way of outputting audio. For example, I can use MME-ederul  (ederul
being the make of soundcard) for jaws, and I use the Ederul setting for
sonar. I assume you don't have an external speach divice for jaws.
Finally, you could experiment with the settings in the audio page, of sonar,
in the options menue I think it is. There are advanced and driver tabs, and
perhaps if you turn of the gitter option in sonar through that menue it
might work better.
No doubt, none of these will work, but I thought I'd email anyway, as not
getting a response would be annoying, I imagine.


----- Original Message ----- 
From: "Brian Kijewski" <sitedblind@xxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Wednesday, April 06, 2005 6:06 PM
Subject: [ddots-l] drivers question


> Hello everybody:
> I have a question regarding drivers in sonar. When I use sonar, the sounds
> heard (when you arm a track or unselect all tracks, etc.) often work, but
> sometimes they do not. It is as if sometimes, only the audio projects and
> midi projects will play, but the other sounds will not. This also goes
with
> any other sounds on my computer out of sonar. If I go into winamp, for
> example, while sonar is still running, sometimes I do not hear anything
when
> I play a song. I was curious if this was because I am using the same sound
> card for recording as I am using for playback. Also, does this have
anything
> to do with the drivers that I am using? Sometimes I will get the message
> that there is a driver error and I am given the option to disable or use
> anyways.
> Thanks.
>
> Brianuilt in sounds
>
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to 
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: