[ddots-l] Re: deplawsive

In sonar you can use the EQ and set the bands to high-pass or low-pass
depending on what you want and set the frequency to 80 60 or 20 or whatever.
for example, set the slider 1 to high-pass, set the frequency to 80 and
enable the band and the EQ, and anything below 80hz on that track will not
go by...if you wanna get rid of anything higher than 100 hz, for like sub
bass or something, use the low pass...
 
HTH, D!J!X!
 

  _____  

From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of neville
Sent: Tuesday, February 19, 2008 9:45 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: deplawsive


How do I do something like that? I'm still trying to figure out how to
remove unwanted frequencies. I have tried fiddling around with the eq in the
inspector, but not with much luck. 

----- Original Message ----- 
From: Joey  <mailto:stuckey2003@xxxxxxx> Stuckey 
To: ddots-l@xxxxxxxxxxxxx 
Sent: Monday, February 18, 2008 7:47 PM
Subject: [ddots-l] Re: deplawsive

You can roll off your E-Q at 20hz, 60hz or 80hz. Depending upon which sound
you want to get rid of. For example, a P sound is different then a WH sound.
 
I just use sound forge for this.
 
J

----- Original Message ----- 
From: Luis  <mailto:luiselorza@xxxxxxxxx> Elorza 
To: ddots-l@xxxxxxxxxxxxx 
Sent: Monday, February 18, 2008 6:15 PM
Subject: [ddots-l] Re: deplawsive

some multiband compressors have presets for that. including the sound forge 
multiband dynamics.
i've not checked on the sonitus multiband.

----- Original Message ----- 
From: "neville" <neville@xxxxxxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Monday, February 18, 2008 11:53 AM
Subject: [ddots-l] deplawsive


Hey I was wondering if anyone knew where I could find a good deplawsive? I 
have spit fish which is a very good de-esser, and now I'm looking for a 
deplawsive. I'm sure that there must be a really good one floting around 
somewhere in siberspace. 


PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, 
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to 
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq





  _____  




No virus found in this incoming message.
Checked by AVG Free Edition. 
Version: 7.5.516 / Virus Database: 269.20.8/1287 - Release Date: 2/19/2008
10:55 AM

Other related posts: