[ddots-l] Re: Using my headphone amp with my tascam
- From: "Jim Jackson" <cs2007@xxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Sun, 11 Oct 2009 20:03:19 -0400
So do you have to physically turn down or turn off your monitors while
recording vocals?
----- Original Message -----
From: Phil Muir
To: ddots-l@xxxxxxxxxxxxx
Sent: Sunday, October 11, 2009 6:09 PM
Subject: [ddots-l] Re: Using my headphone amp with my tascam
Jim. I bought two y cables as unfortunately the FW-1884 only spits out audio
on outputs 1 and 2. Then, I plugged one Y cable into the left output and the
second Y cable into the right output. I then connected my left studio monitor
and the left side of the headphone amp to the left Y cable and the right studio
monitor and the right headphone cable from the headphone amp to the Y cable
coming out of the right hand output [output 2] on the FW-1884. Alternatively,
you could send out the audio via SPDIF if you have anything that can receive
SPDIF.
Regards, Phil Muir
Accessibility Training
Telephone: US (615) 713-2021
UK+44-1747-821-794
Mobile: UK +44-7968-136-246
E-mail:
info@xxxxxxxxxxxxxxxxxxxxxxxxxxx
URL:
www.accessibilitytraining.co.uk/
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]On
Behalf Of Jim Jackson
Sent: 11 October 2009 02:43
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Using my headphone amp with my tascam
Can't figure just where to plug my headphone amp...tried plugging it where
I had my headphones but it really sounds weiard. Thanks in advance for any and
all help.
Jimmy
Other related posts:
