[ddots-l] Re: Using my headphone amp with my tascam
- From: "Phil Muir" <info@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Sun, 11 Oct 2009 23:09:33 +0100
Jim. I bought two y cables as unfortunately the FW-1884 only spits out
audio on outputs 1 and 2. Then, I plugged one Y cable into the left output
and the second Y cable into the right output. I then connected my left
studio monitor and the left side of the headphone amp to the left Y cable
and the right studio monitor and the right headphone cable from the
headphone amp to the Y cable coming out of the right hand output [output 2]
on the FW-1884. Alternatively, you could send out the audio via SPDIF if
you have anything that can receive SPDIF.
Regards, Phil Muir
Accessibility Training
Telephone: US (615) 713-2021
UK+44-1747-821-794
Mobile: UK +44-7968-136-246
E-mail:
info@xxxxxxxxxxxxxxxxxxxxxxxxxxx
URL:
www.accessibilitytraining.co.uk/
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]On
Behalf Of Jim Jackson
Sent: 11 October 2009 02:43
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Using my headphone amp with my tascam
Can't figure just where to plug my headphone amp...tried plugging it where
I had my headphones but it really sounds weiard. Thanks in advance for any
and all help.
Jimmy
Other related posts:
