[ddots-l] Re: Trouble With Microphones
- From: "Dave Hillebrandt" <dave@xxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Wed, 24 Feb 2010 18:28:34 -0500
Seems like the ones that are generally are the more expensive ones. Think I saw
where RME made a good one that was easy to use but unfortunately is not one of
the cheaper ones. Still, thinking about that one currently.
----- Original Message -----
From: Annabelle Susan Morison
To: ddots-l@xxxxxxxxxxxxx
Sent: Wednesday, February 24, 2010 10:39 AM
Subject: [ddots-l] Re: Trouble With Microphones
Aren't there any interfaces with software that could be accessed with a
screenreader?
------------------------------------------------------------------------------
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Dave Hillebrandt
Sent: Wednesday, February 24, 2010 3:12 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Trouble With Microphones
Hi Annabelle,
Unfortunately, it could be many things but cables would be the first
place i'd check. Don't think the knot would have done it though anything is
possible. Usually a connector will go bad and at least a mic cable is cheap. I
have an m-audio fast track ultra and was hearing no output and turns out it was
all in the software for the interface itself where headphone outs were turned
down as well as a couple of the tracks. My m-audio software is not especially
accessible but once a friend of mine got everything cranked up to where it
should be, all is well in the universe. I wish you the best of luck. Dave
----- Original Message -----
From: Annabelle Susan Morison
To: ddots-l@xxxxxxxxxxxxx
Sent: Wednesday, February 24, 2010 1:04 AM
Subject: [ddots-l] Re: Trouble With Microphones
Yes, and I also turned on the Input Echo. My microphones are hooked up to
MOTU Analog 1 and 2 respectively.
----------------------------------------------------------------------------
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Tommy Win
Sent: Tuesday, February 23, 2010 10:01 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Trouble With Microphones
My first guess is maybe the cable went bad. My question is, did you arm the
audio track?
Tommy
----- Original Message -----
From: Annabelle Susan Morison
To: ddots-l@xxxxxxxxxxxxx
Cc: 'NFBnet Music Talk Mailing List'
Sent: Tuesday, February 23, 2010 11:26 PM
Subject: [ddots-l] Trouble With Microphones
Hi, it's Annabelle.
I have a problem that I need urgent help with. I tried hooking up my
AKG414's to my MOTU896HD, and I can't get any audible signal from either of
them. I know I have the pad off, and the high frequency cutoff is turned off. I
know I have the MOTU on Phantom Power, and that the switch is on Microphone.
Also, I know that the XLR is plugged in all the way because it clicks when it's
plugged in all the way. What do I do next? Could it be the XLR I have went bad
on me? What could it be? This is an XLR that my friend Markus showed me how to
wrap by simply tying a knot, instead of the usual over-and-under pattern that
most professionals would teach. Please feel free to Email me at any time, as I
check my Emails several times each day.
Thank you so much,
Annabelle
foristnights@xxxxxxxxxxx
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.435 / Virus Database: 271.1.1/2705 - Release Date: 02/23/10
07:34:00
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.435 / Virus Database: 271.1.1/2705 - Release Date: 02/23/10
07:34:00
Other related posts:
