[ddots-l] Re: Trouble With Microphones

Am sorry to say, a lot of them are not. Am thinking, at some point, I may get 
an interface that does most of its routing and has most controls on the unit 
itself. May make it bigger but at least can get to everything. Have heard good 
things about the interface you have but glad to know its not easily accessable 
before I blow big money on it. Dave
  ----- Original Message ----- 
  From: Annabelle Susan Morison 
  To: ddots-l@xxxxxxxxxxxxx 
  Sent: Wednesday, February 24, 2010 10:38 AM
  Subject: [ddots-l] Re: Trouble With Microphones


  That's quite interesting, because the software for the MOTU 896HD isn't 
accessible to a screenreader either.



------------------------------------------------------------------------------
  From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On 
Behalf Of Dave Hillebrandt
  Sent: Wednesday, February 24, 2010 3:12 AM
  To: ddots-l@xxxxxxxxxxxxx
  Subject: [ddots-l] Re: Trouble With Microphones


  Hi Annabelle,
      Unfortunately, it could be many things but cables would be the first 
place i'd check. Don't think the knot would have done it though anything is 
possible. Usually a connector will go bad and at least a mic cable is cheap. I 
have an m-audio fast track ultra and was hearing no output and turns out it was 
all in the software for the interface itself where headphone outs were turned 
down as well as a couple of the tracks. My m-audio software is not especially 
accessible but once a friend of mine got everything cranked up to where it 
should be, all is well in the universe. I wish you the best of luck. Dave
    ----- Original Message ----- 
    From: Annabelle Susan Morison 
    To: ddots-l@xxxxxxxxxxxxx 
    Sent: Wednesday, February 24, 2010 1:04 AM
    Subject: [ddots-l] Re: Trouble With Microphones


    Yes, and I also turned on the Input Echo. My microphones are hooked up to 
MOTU Analog 1 and 2 respectively.



----------------------------------------------------------------------------
    From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On 
Behalf Of Tommy Win
    Sent: Tuesday, February 23, 2010 10:01 PM
    To: ddots-l@xxxxxxxxxxxxx
    Subject: [ddots-l] Re: Trouble With Microphones


    My first guess is maybe the cable went bad. My question is, did you arm the 
audio track?

    Tommy

      ----- Original Message ----- 
      From: Annabelle Susan Morison 
      To: ddots-l@xxxxxxxxxxxxx 
      Cc: 'NFBnet Music Talk Mailing List' 
      Sent: Tuesday, February 23, 2010 11:26 PM
      Subject: [ddots-l] Trouble With Microphones


      Hi, it's Annabelle.
      I have a problem that I need urgent help with. I tried hooking up my 
AKG414's to my MOTU896HD, and I can't get any audible signal from either of 
them. I know I have the pad off, and the high frequency cutoff is turned off. I 
know I have the MOTU on Phantom Power, and that the switch is on Microphone. 
Also, I know that the XLR is plugged in all the way because it clicks when it's 
plugged in all the way. What do I do next? Could it be the XLR I have went bad 
on me? What could it be? This is an XLR that my friend Markus showed me how to 
wrap by simply tying a knot, instead of the usual over-and-under pattern that 
most professionals would teach. Please feel free to Email me at any time, as I 
check my Emails several times each day.
      Thank you so much,
      Annabelle
      foristnights@xxxxxxxxxxx
    No virus found in this incoming message.
    Checked by AVG - www.avg.com
    Version: 8.5.435 / Virus Database: 271.1.1/2705 - Release Date: 02/23/10 
07:34:00


  No virus found in this incoming message.
  Checked by AVG - www.avg.com
  Version: 8.5.435 / Virus Database: 271.1.1/2705 - Release Date: 02/23/10 
07:34:00

Other related posts: