[ddots-l] Re: Trouble With Microphones

Aren't there any interfaces with software that could be accessed with a
screenreader?

  _____  

From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Dave Hillebrandt
Sent: Wednesday, February 24, 2010 3:12 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Trouble With Microphones


Hi Annabelle,
    Unfortunately, it could be many things but cables would be the first
place i'd check. Don't think the knot would have done it though anything is
possible. Usually a connector will go bad and at least a mic cable is cheap.
I have an m-audio fast track ultra and was hearing no output and turns out
it was all in the software for the interface itself where headphone outs
were turned down as well as a couple of the tracks. My m-audio software is
not especially accessible but once a friend of mine got everything cranked
up to where it should be, all is well in the universe. I wish you the best
of luck. Dave

----- Original Message ----- 
From: Annabelle Susan Morison <mailto:foristnights@xxxxxxxxxxx>  
To: ddots-l@xxxxxxxxxxxxx 
Sent: Wednesday, February 24, 2010 1:04 AM
Subject: [ddots-l] Re: Trouble With Microphones

Yes, and I also turned on the Input Echo. My microphones are hooked up to
MOTU Analog 1 and 2 respectively.

  _____  

From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Tommy Win
Sent: Tuesday, February 23, 2010 10:01 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Trouble With Microphones


My first guess is maybe the cable went bad. My question is, did you arm the
audio track?
 
Tommy

 
----- Original Message ----- 
From: Annabelle Susan Morison <mailto:foristnights@xxxxxxxxxxx>  
To: ddots-l@xxxxxxxxxxxxx 
Cc: 'NFBnet Music Talk Mailing List' <mailto:musictlk@xxxxxxxxxx>  
Sent: Tuesday, February 23, 2010 11:26 PM
Subject: [ddots-l] Trouble With Microphones

Hi, it's Annabelle.
I have a problem that I need urgent help with. I tried hooking up my
AKG414's to my MOTU896HD, and I can't get any audible signal from either of
them. I know I have the pad off, and the high frequency cutoff is turned
off. I know I have the MOTU on Phantom Power, and that the switch is on
Microphone. Also, I know that the XLR is plugged in all the way because it
clicks when it's plugged in all the way. What do I do next? Could it be the
XLR I have went bad on me? What could it be? This is an XLR that my friend
Markus showed me how to wrap by simply tying a knot, instead of the usual
over-and-under pattern that most professionals would teach. Please feel free
to Email me at any time, as I check my Emails several times each day.
Thank you so much,
Annabelle
foristnights@xxxxxxxxxxx <blocked::mailto:foristnights@xxxxxxxxxxx> 

No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.435 / Virus Database: 271.1.1/2705 - Release Date: 02/23/10
07:34:00


No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.435 / Virus Database: 271.1.1/2705 - Release Date: 02/23/10
07:34:00


Other related posts: