[ddots-l] Re: Sound needed!

I think those RCA-like plugs are SPDIF Digial in and out.  The ins are on the 
top row back of the box, 8 on the right looking at the back pannel, and one on 
the left.  Outputs are the row below, same layout 8 to 1 right to left facing 
the panel.

Nick


On Fri, 29 Apr 2005 02:22:29 -0400, Jim Jackson wrote:

Hello all, I need some help figuring out what's going on with my Delta
1010 Sound Card.  I did the following, attached large pin cable to the
front of the break out box by where it reads clock, attached the other
end to the port on the card that has two RCA plugs, on the back of the
computer, plug line en cable in to the back of my powered monitor,
plugged the other end in to one of the out channels on the front of the
break out box, plugged line in cable in to my Rhodes piano, plugged the
other end in to one of the in channels on the break out box, turned on
the monitor and I am getting no sound.  Am I doing everything right or
am I missing something?  Thanks in advance for any help.

** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to 
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq



-- 
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.10.4 - Release Date: 4/27/2005




** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to 
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: