[ddots-l] Re: Sonar help - Why is the metranom geting recorded?

Well, You will want to use two sends instead.  With your present setup, if you 
try using input monitoring while recording, some very nasty stuff will start 
happening.   I am not familiar with the 1622 specifically so I don't know how 
many sends and busses it has.  If it has an extra pair of sub outputs, that's 
what you would use.  Otherwise, you would use a pair of effect sends and if 
possible, set them to pre fader. Then, only turn up the sends on the channels 
you want to record.  
Gord 
  ----- Original Message ----- 
  From: Topdog 
  To: ddots-l@xxxxxxxxxxxxx 
  Sent: Friday, June 27, 2008 4:23 PM
  Subject: [ddots-l] Re: Sonar help - Why is the metranom geting recorded?


  So I noticed about the XLR's being main outs.
  So what would your suggestion be for a proper setup for my 1622FX with Sonar?
  Shall I leave those XLR's or pull them?
  if I pull them, what should the setup be? As it stands, the XLR's are 
connected to the preamps on inputs 1 and 2 of the delta, and the preamps are 
set to line. Those are going to the XLR outs on the 1622.
  I have the outputs of the delta going into 2 inputs on the 1622fx.
  I also have my speakers connected to the 2 connections labeled moniters in 
the back of the 1622fx..

Other related posts: