Hello: You really should connect the inputs of your delta to a set of aux outputs on your mixer if you have them, then only assign the channels you are recording to those outputs. Otherwise, you will be feeding the output of your delta directly back into the input, not a good hthing.. If your mixer does not have aux outputs, you could use a pair of sends and just raise the sneds on the channels you are recording. Gord ----- Original Message ----- From: Topdog To: ddots-l@xxxxxxxxxxxxx Sent: Friday, June 27, 2008 8:47 AM Subject: [ddots-l] Re: Sonar help - Why is the metranom geting recorded? A mixer yes. But I've worked around the problem by just simply setting the record count-in to 0 when recording audio and making sure the record click and playback click is off. On my delta 1010LT only inputs 1 and 2 are being used, the mixer is connected via 2 XLR cables to the 2 preamp inputs of the Delta. In the patchbay router page, it's set to moniter mixer 1/2, and Sonar is using asio instead of WDMKS. The Xlr jumpers, the preamps, are set to line.