[ddots-l] Slightly Off Topic, Re: Re: question regarding using 2 soundcards

We recently switched from dial-up to DSL Internet service and are about to 
add an M-Audio sound card (purchased some time ago from Dancing Dots) to the 
computer to handle web audio using Windows Media Player and/or Real One. We 
use JAWS 6.2 and want to continue using the original card on the mother 
board, identified as an avance AC97, for Eloquence and all Windows sounds.

We have checked out the JFW reference regarding the use of two sound cards 
which was discussed in a July list message pasted below. Nevertheless, the 
actual procedure remains unclear. For example, does one first choose the new 
M-Audio card under "audio devices" from the control panel, then rewrite the 
JFW.ini file to specify the original card as the default for Eloquence? Or 
is there a concept here that I am failing to understand?

Any help off list will be much appreciated.

Thanks.

Ed McDonald
Host/Producer, Sidetracks
EIO Productions
151 South Mineral Street
Keyser, WV  26726
Phone: 304 788 0129

emcdonald@xxxxxxxxxxxx


----- Original Message ----- 
From: "hf" <neep23@xxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Thursday, July 07, 2005 7:56 AM
Subject: [ddots-l] Re: question regarding using 2 soundcards


Hi Omar,

Go to
http://www.freedomscientific.com/fs_support/BulletinView.cfm?QC=432
It will give step by step instructions as to make sure JAWS uses the sound
card you want.

----- Original Message ----- 
From: "omar binno" <omarbinno@xxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Thursday, June 30, 2005 10:01 AM
Subject: [ddots-l] question regarding using 2 soundcards


> Hello:
>
> I am reading up on the recording to audio section in
> the cake talking 4 tutorials, and it states:
>
> "In order to record and playback audio, you should use
> separate audio cards for the voice synthesis of your
> screen reader, and for the processing of your audio.
> You can achieve this by having 2 soundcards in your
> computer, or having an audio processing card plus an
> external synthesizer for speech synthesis."
>
> I am using an M-Audio Delta 44 Soundcard, and had
> originally disabled the internal soundcard that came
> installed on my computer. With the statement above,
> however, does this mean that I should reenable my
> original soundcard? If so, how do I assign JAWS to
> work through that card, and keep my audio recordings
> going through the delta 44? Am I understand all this
> correctly?
>
> Thanks for any help.
>
> Omar Binno
>
> We have come from God, and inevitably the myths woven by us, though they
> contain error, will also reflect a splintered fragment of the true light,
> the eternal truth that is with God. Indeed only by myth-making, only by
> becoming a "sub-creator" and inventing stories, can Man aspire to the
> state of perfection that he knew before the Fall. Our myths may be
> misguided, but they steer however shakily towards the true harbor, while
> materialistic "progress" leads only to a yawning abyss and the Iron Crown
> of the power of evil. - J. R. R. Tolkien - Author of The Lord Of The Rings
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>

** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq



** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to 
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: