[ddots-l] Re: Set jaws to speak through a different soundcard

In some cases it is not necessary. It may be that Phil is correct about the alphabetical thing. But what I was told is, it depends on the order of installation of the cards. With Jaws technicians you don't know who is correct. I've dealt with some fantastic techs, and I've dealt with some who couldn't find their way out of a paper bag. What you do is, pray before you call tech support, and you ask for favor. (Smile!)


At 06:38 AM 12/28/2006, Mike Christer wrote:
Hey Phil!

Is this really necessary?

I have a Delta Audiophile exclusively for JAWS, and I didn't have to make
any of these settings, and it worx fine!

Not criticising, I'm just interested?

Cheers

Mike
----- Original Message -----
From: "Phil Halton" <philhalt@xxxxxxxxxxx>
To: "ddots-l" <ddots-l@xxxxxxxxxxxxx>
Sent: Wednesday, December 27, 2006 9:42 PM
Subject: [ddots-l] Set jaws to speak through a different soundcard


> Here are those directions for making jaws use the soundcard you specify
> for speech output.  This is an excerpt from a JFW tech support bulletin.
> Make sure you don't do step two--installing the elloq.jls driver--its not
> necessary for versions of jaws above 5.0
>
> Question:
>
>
> I have two sound cards on my computer. How do I make sure JAWS uses the
> one I want?
>
> Answer:
>
> Many JAWS users who also use music or audio production software want JAWS
> and Eloquence to speak through one sound card, while using the other for
> their
> production work. To do this, you need to edit a file called JFW.ini and
> install the updated Eloquence Speech driver in the accompanying zip file.
>
> Editing the jfw.ini file:
>
> 1. Using My Computer or Windows Explorer, browse your hard drive to the
> currently running version of JAWS and find the jfw.ini file in that
> folder.
>
> 2. Press ENTER to open.
>
> 3. You should find some lines that read:
>
> Synth1Name=eloq
>
> Synth1LongName=Eloquence for JAWS
>
> Synth1Driver=eloq
>
> The number doesn't matter, it may be 1, 2, or 3, but it must be the same
> for all entries for Eloquence.
>
> 4. Add the following line after the driver line: Synth1Port=SB Live! Wave
> Device Of course, you need to make sure that the synth number matches the
> other
> lines, so that if the Driver line read:
>
> Sytn3Driver=eloq
>
> Then the port line would read:
>
> Synth3Port=SB Live! Wave Device
>
> The text after the = sign in the Port line comes from Control Panel/Sound
> & Multimedia/Audio tab It must be one of the entries that can be chosen
> for Preferred
> Playback device.
>
> 5. Save your changes and exit Notepad. With JAWS version 5.x and higher,
> you are done.
>
> If you have JAWS version 4.x, you will also need to install the updated
> driver. As long as JAWS is running and speaking through Eloquence,
> eloq.jls cannot
> be simply overwritten when unzipping the file. You will need to switch to
> NoSpeech or MS SAPI to get the eloq.jls to overwrite properly.
>
> 1. Download the file from
>
> ftp://ftp.freedomscientific.com/users/hj/private/eloq.zip
>
> 2. Unzip the zip file into the root of the active JAWS directory where you
> made the change to the jfw.ini file.
>
> 3. Restart JAWS and it should now be speaking from the sound card you
> wanted.
>
> 4. If not, make sure the entries are correct in the jfw.ini file and that
> your sound card is indeed installed correctly. Most audio and music
> production
> software allows you to select a sound device for it as well, so it can use
> one sound card while JAWS uses another.
>
> Search Our Knowledge Base
>
>
> Search
>
> Click Here To Provide Feedback About This Page.
>
> Additional
> Resources:--------------------------------------------------------------------------------
>
> Hardware
> Software
> Training
> Tutorials
> Accessories
> Documentation
>>
>
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the
> Subject:- faq
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.409 / Virus Database: 268.15.28/605 - Release Date:
> 27/12/2006
>
>

** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq


--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.409 / Virus Database: 268.15.28/606 - Release Date: 12/28/2006

Sandy Licht

Jeremiah 29:11 - 14 A   .
11 For I know the plans I have for you," says the Lord. "They are plans for good and not for disaster, to give you a future and a hope. 12 In those days when you pray, I will listen. 13 If you look for me in earnest, you will find me when you seek me. 14 I will be found by you," says the Lord.

** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: