[ddots-l] Re: Set jaws to speak through a different soundcard

Hey! Send that guy over here! We could use him! When my laptop arrives, I intend to keep it off the Internet, for the most part. I'll go on-line if I have to, but it will mainly be for audio. 

At 12:49 PM 12/29/2006, Mike Christer wrote:

Hey Sandy!

Thanx for the words of wisdom, but fortunately
I'm ok in that department, my system came with a recovery file and recovery
CD!
The recovery file is some 10 gigs in size, and I saved that little bugger a
long time ago, believe me!

A friend came round the other morning to suss the problems, and he says a
seriously bad load of virtually undetectable spyware and virus crap has
invaded via my web browser!
Luckily for me, this guy is ex-military, a professional hacker by trade, a
guy with almost an autistic ability with numbers, capable of remembering
sequences of digits/symbols/letters of unbelievable size, some literally
hundreds and hundreds in length!
He can, reputedly, hack in to anything, at least he hasn't failed yet...

Now, I wish I had a brain like that!!!

Laters

Mike


----- Original Message -----
From: "Sandy Licht" <slicht@xxxxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>; <ddots-l@xxxxxxxxxxxxx>
Sent: Friday, December 29, 2006 6:11 PM
Subject: [ddots-l] Re: Set jaws to speak through a different soundcard


> Before doing that, purchase and install back up software.  Chris Bell on
> the Midimag list can tell you what he uses.  He says it is extremely
> accessible.  Then before you do a reformat, learn how to use the software.
> There is a recovery program you apparently have to use.  I didn't know
> this at the time of my reformat... much to my grief.  You are not two
> years old, and I know you know this.  So please forgive the unneeded
> advice.  But, if I can prevent the hours of frustration I went through...
> it is worth your disgusted shrugs.
>
> At 12:05 PM 12/29/2006, Mike Christer wrote:
>>Please don't tempt fate, it looks like I'm gonna have to do just that next
>>week!!!
>>----- Original Message -----
>>From: "Sandy Licht" <slicht@xxxxxxxxxxxxxx>
>>To: <ddots-l@xxxxxxxxxxxxx>; <ddots-l@xxxxxxxxxxxxx>
>>Sent: Friday, December 29, 2006 4:13 PM
>>Subject: [ddots-l] Re: Set jaws to speak through a different soundcard
>>
>>
>> > Life is too short to look for problems.  On a scale from one to ten,
>> > this
>> > one doesn't even rate.  There are a lot worse ones.  For instance, be
>> > forced to reformat your hard drive, before you learn to use your back
>> > up
>> > software...  Been there and done that one!!!.
>> >
>> > At 08:35 AM 12/29/2006, Phil Halton wrote:
>> >>I get it-"why is everything working so well?  What's wrong here"?
>> >>
>> >>----- Original Message ----- From: "Mike Christer"
>> >><m-christer@xxxxxxxxxxxxx>
>> >>To: <ddots-l@xxxxxxxxxxxxx>
>> >>Sent: Friday, December 29, 2006 6:41 AM
>> >>Subject: [ddots-l] Re: Set jaws to speak through a different soundcard
>> >>
>> >>
>> >>>Wow!
>> >>>You gotta be one of the first listers to admit he's looking for
>> >>>problems?
>> >>>----- Original Message ----- From: "neville"
>> >>><neville@xxxxxxxxxxxxxxxx>
>> >>>To: <ddots-l@xxxxxxxxxxxxx>
>> >>>Sent: Thursday, December 28, 2006 8:54 PM
>> >>>Subject: [ddots-l] Re: Set jaws to speak through a different soundcard
>> >>>
>> >>>
>> >>>>I didn't have a problem with Jaws using the wrong sound card. I was
>> >>>>asking because I wan'ted to know why it was working fine with the
>> >>>>ones I
>> >>>>have.
>> >>>>----- Original Message ----- From: "Mike Christer"
>> >>>><m-christer@xxxxxxxxxxxxx>
>> >>>>To: <ddots-l@xxxxxxxxxxxxx>
>> >>>>Sent: Thursday, December 28, 2006 1:19 PM
>> >>>>Subject: [ddots-l] Re: Set jaws to speak through a different
>> >>>>soundcard
>> >>>>
>> >>>>
>> >>>>>    I reckon if you've got a problem with JAWS coming thru the wrong
>> >>>>> soundcard, then the way to go is as Phil said in his original
>> >>>>> posting.
>> >>>>>I guess some of us just don't have an issue with this?
>> >>>>>
>> >>>>>
>> >>>>>----- Original Message ----- From: "Neville"
>> >>>>><neville@xxxxxxxxxxxxxxxx>
>> >>>>>To: <ddots-l@xxxxxxxxxxxxx>
>> >>>>>Sent: Thursday, December 28, 2006 3:22 PM
>> >>>>>Subject: [ddots-l] Re: Set jaws to speak through a different
>> >>>>>soundcard
>> >>>>>
>> >>>>>
>> >>>>>>I was wondering about what you said. I have a sound Blaster Live
>> >>>>>>and a
>> >>>>>>Delta 10 10. I don't remember having to set up anything like that.
>> >>>>>>Jaws has
>> >>>>>>always spoken through my sound blaster. I can go into the control
>> >>>>>>panel and
>> >>>>>>change it, but there is no need for that.What do you think? .
>> >>>>>>----- Original Message ----- From: "Mike Christer"
>> >>>>>><m-christer@xxxxxxxxxxxxx>
>> >>>>>>To: <ddots-l@xxxxxxxxxxxxx>
>> >>>>>>Sent: Thursday, December 28, 2006 7:38 AM
>> >>>>>>Subject: [ddots-l] Re: Set jaws to speak through a different
>> >>>>>>soundcard
>> >>>>>>
>> >>>>>>
>> >>>>>>>Hey Phil!
>> >>>>>>>
>> >>>>>>>Is this really necessary?
>> >>>>>>>
>> >>>>>>>I have a Delta Audiophile exclusively for JAWS, and I didn't have
>> >>>>>>>to
>> >>>>>>>make
>> >>>>>>>any of these settings, and it worx fine!
>> >>>>>>>
>> >>>>>>>Not criticising, I'm just interested?
>> >>>>>>>
>> >>>>>>>Cheers
>> >>>>>>>
>> >>>>>>>Mike
>> >>>>>>>----- Original Message ----- From: "Phil Halton"
>> >>>>>>><philhalt@xxxxxxxxxxx>
>> >>>>>>>To: "ddots-l" <ddots-l@xxxxxxxxxxxxx>
>> >>>>>>>Sent: Wednesday, December 27, 2006 9:42 PM
>> >>>>>>>Subject: [ddots-l] Set jaws to speak through a different soundcard
>> >>>>>>>
>> >>>>>>>
>> >>>>>>>>Here are those directions for making jaws use the soundcard you
>> >>>>>>>>specify
>> >>>>>>>>for speech output.  This is an excerpt from a JFW tech support
>> >>>>>>>>bulletin.
>> >>>>>>>>Make sure you don't do step two--installing the elloq.jls
>> >>>>>>>>driver--its
>> >>>>>>>>not necessary for versions of jaws above 5.0
>> >>>>>>>>
>> >>>>>>>>Question:
>> >>>>>>>>
>> >>>>>>>>
>> >>>>>>>>I have two sound cards on my computer. How do I make sure JAWS
>> >>>>>>>>uses
>> >>>>>>>>the
>> >>>>>>>>one I want?
>> >>>>>>>>
>> >>>>>>>>Answer:
>> >>>>>>>>
>> >>>>>>>>Many JAWS users who also use music or audio production software
>> >>>>>>>>want
>> >>>>>>>>JAWS and Eloquence to speak through one sound card, while using
>> >>>>>>>>the
>> >>>>>>>>other for their
>> >>>>>>>>production work. To do this, you need to edit a file called
>> >>>>>>>>JFW.ini
>> >>>>>>>>and
>> >>>>>>>>install the updated Eloquence Speech driver in the accompanying
>> >>>>>>>>zip
>> >>>>>>>>file.
>> >>>>>>>>
>> >>>>>>>>Editing the jfw.ini file:
>> >>>>>>>>
>> >>>>>>>>1. Using My Computer or Windows Explorer, browse your hard drive
>> >>>>>>>>to
>> >>>>>>>>the
>> >>>>>>>>currently running version of JAWS and find the jfw.ini file in
>> >>>>>>>>that
>> >>>>>>>>folder.
>> >>>>>>>>
>> >>>>>>>>2. Press ENTER to open.
>> >>>>>>>>
>> >>>>>>>>3. You should find some lines that read:
>> >>>>>>>>
>> >>>>>>>>Synth1Name=eloq
>> >>>>>>>>
>> >>>>>>>>Synth1LongName=Eloquence for JAWS
>> >>>>>>>>
>> >>>>>>>>Synth1Driver=eloq
>> >>>>>>>>
>> >>>>>>>>The number doesn't matter, it may be 1, 2, or 3, but it must be
>> >>>>>>>>the
>> >>>>>>>>same
>> >>>>>>>>for all entries for Eloquence.
>> >>>>>>>>
>> >>>>>>>>4. Add the following line after the driver line: Synth1Port=SB
>> >>>>>>>>Live!
>> >>>>>>>>Wave Device Of course, you need to make sure that the synth
>> >>>>>>>>number
>> >>>>>>>>matches the other
>> >>>>>>>>lines, so that if the Driver line read:
>> >>>>>>>>
>> >>>>>>>>Sytn3Driver=eloq
>> >>>>>>>>
>> >>>>>>>>Then the port line would read:
>> >>>>>>>>
>> >>>>>>>>Synth3Port=SB Live! Wave Device
>> >>>>>>>>
>> >>>>>>>>The text after the = sign in the Port line comes from Control
>> >>>>>>>>Panel/Sound & Multimedia/Audio tab It must be one of the entries
>> >>>>>>>>that
>> >>>>>>>>can be chosen for Preferred
>> >>>>>>>>Playback device.
>> >>>>>>>>
>> >>>>>>>>5. Save your changes and exit Notepad. With JAWS version 5.x and
>> >>>>>>>>higher,
>> >>>>>>>>you are done.
>> >>>>>>>>
>> >>>>>>>>If you have JAWS version 4.x, you will also need to install the
>> >>>>>>>>updated
>> >>>>>>>>driver. As long as JAWS is running and speaking through
>> >>>>>>>>Eloquence,
>> >>>>>>>>eloq.jls cannot
>> >>>>>>>>be simply overwritten when unzipping the file. You will need to
>> >>>>>>>>switch
>> >>>>>>>>to NoSpeech or MS SAPI to get the eloq.jls to overwrite properly.
>> >>>>>>>>
>> >>>>>>>>1. Download the file from
>> >>>>>>>>
>> >>>>>>>>ftp://ftp.freedomscientific.com/users/hj/private/eloq.zip
>> >>>>>>>>
>> >>>>>>>>2. Unzip the zip file into the root of the active JAWS directory
>> >>>>>>>>where
>> >>>>>>>>you made the change to the jfw.ini file.
>> >>>>>>>>
>> >>>>>>>>3. Restart JAWS and it should now be speaking from the sound card
>> >>>>>>>>you
>> >>>>>>>>wanted.
>> >>>>>>>>
>> >>>>>>>>4. If not, make sure the entries are correct in the jfw.ini file
>> >>>>>>>>and
>> >>>>>>>>that your sound card is indeed installed correctly. Most audio
>> >>>>>>>>and
>> >>>>>>>>music
>> >>>>>>>>production
>> >>>>>>>>software allows you to select a sound device for it as well, so
>> >>>>>>>>it
>> >>>>>>>>can
>> >>>>>>>>use one sound card while JAWS uses another.
>> >>>>>>>>
>> >>>>>>>>Search Our Knowledge Base
>> >>>>>>>>
>> >>>>>>>>
>> >>>>>>>>Search
>> >>>>>>>>
>> >>>>>>>>Click Here To Provide Feedback About This Page.
>> >>>>>>>>
>> >>>>>>>>Additional
>> >>>>>>>>Resources:--------------------------------------------------
>> ------------------------------
>> >>>>>>>>
>> >>>>>>>>Hardware
>> >>>>>>>>Software
>> >>>>>>>>Training
>> >>>>>>>>Tutorials
>> >>>>>>>>Accessories
>> >>>>>>>>Documentation
>> >>>>>>>>
>> >>>>>>>>
>> >>>>>>>>** To leave the list, click on the immediately-following link:-
>> >>>>>>>>** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> >>>>>>>>** If this link doesn't work then send a message to:
>> >>>>>>>>** ddots-l-request@xxxxxxxxxxxxx
>> >>>>>>>>** and in the Subject line type
>> >>>>>>>>** unsubscribe
>> >>>>>>>>** For other list commands such as vacation mode, click on the
>> >>>>>>>>** immediately-following link:-
>> >>>>>>>>** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>> >>>>>>>>** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with
>> >>>>>>>>the
>> >>>>>>>>Subject:- faq
>> >>>>>>>>
>> >>>>>>>>
>> >>>>>>>>
>> >>>>>>>>--
>> >>>>>>>>No virus found in this incoming message.
>> >>>>>>>>Checked by AVG Free Edition.
>> >>>>>>>>Version: 7.1.409 / Virus Database: 268.15.28/605 - Release Date:
>> >>>>>>>>27/12/2006
>> >>>>>>>>
>> >>>>>>>
>> >>>>>>>** To leave the list, click on the immediately-following link:-
>> >>>>>>>** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> >>>>>>>** If this link doesn't work then send a message to:
>> >>>>>>>** ddots-l-request@xxxxxxxxxxxxx
>> >>>>>>>** and in the Subject line type
>> >>>>>>>** unsubscribe
>> >>>>>>>** For other list commands such as vacation mode, click on the
>> >>>>>>>** immediately-following link:-
>> >>>>>>>** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>> >>>>>>>** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the
>> >>>>>>>Subject:- faq
>> >>>>>>>
>> >>>>>>>
>> >>>>>>
>> >>>>>>
>> >>>>>>** To leave the list, click on the immediately-following link:-
>> >>>>>>** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> >>>>>>** If this link doesn't work then send a message to:
>> >>>>>>** ddots-l-request@xxxxxxxxxxxxx
>> >>>>>>** and in the Subject line type
>> >>>>>>** unsubscribe
>> >>>>>>** For other list commands such as vacation mode, click on the
>> >>>>>>** immediately-following link:-
>> >>>>>>** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>> >>>>>>** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the
>> >>>>>>Subject:- faq
>> >>>>>>
>> >>>>>>
>> >>>>>>
>> >>>>>>--
>> >>>>>>No virus found in this incoming message.
>> >>>>>>Checked by AVG Free Edition.
>> >>>>>>Version: 7.1.409 / Virus Database: 268.15.28/605 - Release Date:
>> >>>>>>27/12/2006
>> >>>>>>
>> >>>>>
>> >>>>>
>> >>>>>** To leave the list, click on the immediately-following link:-
>> >>>>>** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> >>>>>** If this link doesn't work then send a message to:
>> >>>>>** ddots-l-request@xxxxxxxxxxxxx
>> >>>>>** and in the Subject line type
>> >>>>>** unsubscribe
>> >>>>>** For other list commands such as vacation mode, click on the
>> >>>>>** immediately-following link:-
>> >>>>>** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>> >>>>>** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the
>> >>>>>Subject:- faq
>> >>>>>
>> >>>>>
>> >>>>
>> >>>>
>> >>>>** To leave the list, click on the immediately-following link:-
>> >>>>** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> >>>>** If this link doesn't work then send a message to:
>> >>>>** ddots-l-request@xxxxxxxxxxxxx
>> >>>>** and in the Subject line type
>> >>>>** unsubscribe
>> >>>>** For other list commands such as vacation mode, click on the
>> >>>>** immediately-following link:-
>> >>>>** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>> >>>>** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the
>> >>>>Subject:- faq
>> >>>>
>> >>>>
>> >>>>
>> >>>>--
>> >>>>No virus found in this incoming message.
>> >>>>Checked by AVG Free Edition.
>> >>>>Version: 7.1.409 / Virus Database: 268.15.28/605 - Release Date:
>> >>>>27/12/2006
>> >>>>
>> >>>
>> >>>** To leave the list, click on the immediately-following link:-
>> >>>** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> >>>** If this link doesn't work then send a message to:
>> >>>** ddots-l-request@xxxxxxxxxxxxx
>> >>>** and in the Subject line type
>> >>>** unsubscribe
>> >>>** For other list commands such as vacation mode, click on the
>> >>>** immediately-following link:-
>> >>>** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>> >>>** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the
>> >>>Subject:- faq
>> >>
>> >>** To leave the list, click on the immediately-following link:-
>> >>** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> >>** If this link doesn't work then send a message to:
>> >>** ddots-l-request@xxxxxxxxxxxxx
>> >>** and in the Subject line type
>> >>** unsubscribe
>> >>** For other list commands such as vacation mode, click on the
>> >>** immediately-following link:-
>> >>** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>> >>** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the
>> >>Subject:- faq
>> >>
>> >>
>> >>--
>> >>No virus found in this incoming message.
>> >>Checked by AVG Free Edition.
>> >>Version: 7.1.409 / Virus Database: 268.15.29/608 - Release Date:
>> >>12/29/2006
>> >
>> > Sandy Licht
>> >
>> > Jeremiah 29:11 - 14 A   .
>> > 11 For I know the plans I have for you," says the Lord. "They are plans
>> > for good and not for disaster, to give you a future and a hope. 12 In
>> > those days when you pray, I will listen. 13 If you look for me in
>> > earnest,
>> > you will find me when you seek me. 14 I will be found by you," says the
>> > Lord.
>> >
>> > ** To leave the list, click on the immediately-following link:-
>> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> > ** If this link doesn't work then send a message to:
>> > ** ddots-l-request@xxxxxxxxxxxxx
>> > ** and in the Subject line type
>> > ** unsubscribe
>> > ** For other list commands such as vacation mode, click on the
>> > ** immediately-following link:-
>> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>> > ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the
>> > Subject:- faq
>> >
>> >
>> >
>> > --
>> > No virus found in this incoming message.
>> > Checked by AVG Free Edition.
>> > Version: 7.1.409 / Virus Database: 268.15.28/605 - Release Date:
>> > 27/12/2006
>> >
>> >
>>
>>** To leave the list, click on the immediately-following link:-
>>** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>** If this link doesn't work then send a message to:
>>** ddots-l-request@xxxxxxxxxxxxx
>>** and in the Subject line type
>>** unsubscribe
>>** For other list commands such as vacation mode, click on the
>>** immediately-following link:-
>>** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>>** or send a message, to
>>** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>>
>>
>>--
>>No virus found in this incoming message.
>>Checked by AVG Free Edition.
>>Version: 7.1.409 / Virus Database: 268.15.29/608 - Release Date:
>>12/29/2006
>
> Sandy Licht
>
> Jeremiah 29:11 - 14 A   .
> 11 For I know the plans I have for you," says the Lord. "They are plans
> for good and not for disaster, to give you a future and a hope. 12 In
> those days when you pray, I will listen. 13 If you look for me in earnest,
> you will find me when you seek me. 14 I will be found by you," says the
> Lord.
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the
> Subject:- faq
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.409 / Virus Database: 268.15.28/605 - Release Date:
> 27/12/2006
>
>

** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq


--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.409 / Virus Database: 268.15.29/608 - Release Date: 12/29/2006


Sandy Licht

Jeremiah 29:11 - 14 A   .
11 For I know the plans I have for you," says the Lord. "They are plans for good and not for disaster, to give you a future and a hope. 12 In those days when you pray, I will listen. 13 If you look for me in earnest, you will find me when you seek me. 14 I will be found by you," says the Lord. 

** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: