[ddots-l] Re: Reinstalling Sonar and Cake Talking
- From: Stephen Giannaros <stephen.giannaros@xxxxxxxxx>
- To: ddots-l@xxxxxxxxxxxxx
- Date: Sun, 15 Apr 2012 19:05:29 -0400
Mark, I read that too, regarding JAWS 11 being the best version. Good
chatting and I will keep you posted.
On 4/15/12, Mark Dew <jmkeybd1@xxxxxxxxxxx> wrote:
> Steve, keep us posted.
> Just to llet you know, as of today, Jaws 11 works best with ct.
> There are some issues with 12 and 13 and ct working together.
> I found this to be true and rolled back to 11.
> Tomorrow, you will most likely get more help from the group. It seems to get
> a little quiet on the weekends.
>
> Mark
> My WEBSITE
> http://www.markdew.com
>
> ----- Original Message -----
> From: "Stephen Giannaros" <stephen.giannaros@xxxxxxxxx>
> To: <ddots-l@xxxxxxxxxxxxx>
> Sent: Sunday, April 15, 2012 3:45 PM
> Subject: [ddots-l] Re: Reinstalling Sonar and Cake Talking
>
>
> HI Mark,
> I did start Sonar before installing Cake Talking, and followed the
> instructions from the DD’s website. So, a little while ago I
> uninstalled Cake Talking, restarted my computer, then opened up Sonar,
> and the message I got was that there were no drivers to support the
> application and to check out the driver mode. I also sent an email to
> a rep at Dancing Dots to double check the serial number on file, as
> well as Freedom Scientific to see if my serial number changed when
> upgrading to JAWS 13. So that’s basically where I’m at.
>
> Steve
>
>
> On 4/15/12, Mark Dew <jmkeybd1@xxxxxxxxxxx> wrote:
>> Steve, first did you run Sonar once before installing Caketalking?
>> If not, you need to do this, otherwise Ct wil not function properly.
>>
>> Mark
>> My WEBSITE
>> http://www.markdew.com
>>
>> ----- Original Message -----
>> From: "Stephen Giannaros" <stephen.giannaros@xxxxxxxxx>
>> To: <ddots-l@xxxxxxxxxxxxx>
>> Sent: Sunday, April 15, 2012 1:11 PM
>> Subject: [ddots-l] Reinstalling Sonar and Cake Talking
>>
>>
>> Hello all,
>> My name is Steve Giannaros and I’m a musician from Boston. Last week
>> I registered with this list, and have only been using Cake Talking for
>> two years. This is my first time reinstalling it, along with Sonar
>> 8.5 on to a new computer.
>> I am having a couple of issues, which I am sure are simple, but I am
>> stuck. First, after everything is installed, computer restarted, I
>> open Sonar and the message says that this version of Cake Talking is
>> not authorized for this computer. Last week I bought a new computer
>> and also upgraded to JAWS 13, but as far as I know I still have the
>> same JAWS serial number, and used the installation code the rep from
>> Dancing Dots gave me. Some other info that may be relevant to my
>> questions, I now have a new operating system. On my old computer I
>> had Vista 32 bit, but now have Windows 7 64 bit. I also downloaded
>> the newest version of Sonar 8.5, which is Sonar 8.5.3.
>> So that is issue number one. Issue number two is, along with that
>> message I mentioned above, I get another message that I am missing
>> plugins, but when I go to "Insert" then manage plugins, it looks like
>> most of what I was using before are in there. Not sure if these two
>> problems are going hand in hand or two separate issues but can anyone
>> give me some insight or direction on what I should do?
>>
>> Thank you!
>>
>>
>> Steve
>>
>> Website: http://www.stevegiannaros.com
>> PLEASE READ THIS FOOTER AT LEAST ONCE!
>> To leave the list, click on the immediately following link:
>> ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
>> If this link doesn't work then send a message to:
>> ddots-l-request@xxxxxxxxxxxxx
>> and in the Subject line type
>> unsubscribe
>> For other list commands such as vacation mode,
>> click on the immediately following link:
>> ddots-l-request@xxxxxxxxxxxxx?subjectúq or
>> send a message, to
>> ddots-l-request@xxxxxxxxxxxxx
>> and in the Subject line type
>> faq
>>
>> PLEASE READ THIS FOOTER AT LEAST ONCE!
>> To leave the list, click on the immediately following link:
>> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
>> If this link doesn't work then send a message to:
>> ddots-l-request@xxxxxxxxxxxxx
>> and in the Subject line type
>> unsubscribe
>> For other list commands such as vacation mode,
>> click on the immediately following link:
>> ddots-l-request@xxxxxxxxxxxxx?subject=faq or
>> send a message, to
>> ddots-l-request@xxxxxxxxxxxxx
>> and in the Subject line type
>> faq
>>
>>
> PLEASE READ THIS FOOTER AT LEAST ONCE!
> To leave the list, click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
> If this link doesn't work then send a message to:
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> unsubscribe
> For other list commands such as vacation mode,
> click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subjectúq or
> send a message, to
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> faq
>
> PLEASE READ THIS FOOTER AT LEAST ONCE!
> To leave the list, click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
> If this link doesn't work then send a message to:
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> unsubscribe
> For other list commands such as vacation mode,
> click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=faq or
> send a message, to
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> faq
>
>
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subjectúq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
Other related posts:
