No! Sorry didn't clarify, but I did them separately, first 1, and then 2. ----- Original Message ----- From: Mike Christer To: ddots-l@xxxxxxxxxxxxx Sent: Monday, October 12, 2009 1:14 PM Subject: [ddots-l] Re: Recording issues Hey Jim! You'll only be able to monitor one track's input level/peak meter reading at a time. So, you'll have to arm each track separately and take an input level reading, then switch to the other... Of course, you'll be able to record the 2 trax simultaneously! I think this could be the prob? Mike ----- Original Message ----- From: Jim Jackson To: ddots-l@xxxxxxxxxxxxx Sent: Monday, October 12, 2009 5:31 PM Subject: [ddots-l] Recording issues Hello all, I'm attempting to record vocals, I have things set up as follows, vocal mic 1, audio track 1 and input set to left-acio fw-1884analog1 the cable from the mic is plugged in to the far left slr slot on the back of the tascam as I face the front of the unit. No prob with this one, I can both hear the audio and can monitor the peak levels. The second audio track is vocal mic 2, Input set to left acio fw-1884analog3, the cable from the mic is plugged in to the next slr slot. I can hear the audio from the mic but the peak meters are not changing, I go in to record and get nothing. BTW, on both tracks the output is set to master. What am I doing? Jimmy ---------------------------------------------------------------------------- No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.421 / Virus Database: 270.14.12/2431 - Release Date: 10/12/09 13:01:00